Mac Ipv4 Network Configuration - Gigabyte E263-Z30-AAD1 User Manual

Edge server – 2u up short depth amd epyc 9004 server system nvme/sata/sas
Hide thumbs Also See for E263-Z30-AAD1:
Table of Contents

Advertisement

5-2-19 MAC IPv4 Network Configuration

Parameter
Configured
Enable DHCP
(Note)
Local IP Address
(Note)
Local NetMask
(Note)
Local Gateway
(Note)
Local DNS Servers
(Note)
Save Changes and Exit
(Note)
This item appears when Configured is set to Enabled.
Description
Indicates whether network address is configured successfully or not.
Options available: Enabled, Disabled. Default setting is Disabled.
Options available: Enabled, Disabled. Default setting is Disabled.
Press [Enter] to configure local IP address.
Press [Enter] to configure local NetMask.
Press [Enter] to configure local Gateway
Press [Enter] to configure local DNS servers
Press [Enter] to save all configurations.
BIOS Setup
- 76 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

E263-z30

Table of Contents