Gigabyte E263-Z30-AAD1 User Manual page 100

5-3-3-3-1 Data Eye
Parameter
Data Eye
Pattern Select
Pattern Length
Aggressor Channel
Aggressor Static Lane
Control
Aggressor Static Lane
Select Upper 32 bits
Aggressor Static Lane
Select Lower 32 bits
Aggressor Static Lane
Select ECC
Aggressor Static Lane
Value
Target Static Lane Control
Description
Options available: PRBS, SSO, Both. Default setting is PRBS.
Determines the pattern length. The possible options are N=3....12.
This item helps read the aggressors channels.
Options available: One Sub-Channel, Half Channels, All Channels. Default
setting is All Channels.
Enable/Disable the Aggressor Static Lane Control function.
Options available: Enabled, Disabled. Default setting is Disabled.
This item is configurable when Aggressor Static Lane Control is set to
Enabled.
This item is configurable when Aggressor Static Lane Control is set to
Enabled.
This item is configurable when Aggressor Static Lane Control is set to
Enabled.
This item is configurable when Aggressor Static Lane Control is set to
Enabled.
Enable/Disable the Target Static Lane Control function.
Options available: Enabled, Disabled. Default setting is Disabled.
BIOS Setup
- 100 -