Gigabyte E263-Z30-AAD1 User Manual page 121

Parameter
MPDMA-TF
(continued)
RCC_DEV0
Description
SDXI Class Code
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
ACS Rcc_Dev0
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
AER Rcc_Dev0
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
DlfEnableStrap1
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
Phy16GTStrap1
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
MarginEnStrap1
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
SourceValStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
TranslationalBlockingStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
P2pReq ACS Control
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
P2pCompStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
UpstreamFwdStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
P2PEgressStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
DirectTranslatedStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
SsidEnStrap5
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
PriEnPageReq
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
PriResetPageReq
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
SourceVal ACS cntl
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
TranslationalBlocking ACS Control
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
P2pComp ACS Control
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
UpstreamFwd ACS Control
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
P2PEgress ACS Control
Š
– Options available: Auto, Disable, Enable. Default setting is Auto.
BIOS Setup
- 121 -