Gigabyte E263-Z30-AAD1 User Manual page 61

Parameter
PCI Bus Driver Version
SLOT#
(Note1)
SLOT #_I/O ROM
(Note1)
SLOT #_Link Speed
(Note1)
OCP#
(Note2)
OCP# I/O ROM
(Note2)
OCP# Link Speed
(Note2)
U2_P0_G0/1/2
U2_P0_G0/1/2/3 I/O ROM
U2_P0_G0/1/2 Link Speed
U2_P0_G3, root port 2/3/4
Onboard LAN Controller
Onboard LAN# I/O ROM
PCI Devices Common Settings
Above 4G Decoding
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available OCP connector.
(Note3) This section is dependent on the available LAN controller.
Description
Displays the PCI Bus Driver version information.
Change the PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
for the related PCI-E slot.
Options available: Disabled, Enabled. Default setting is Enabled.
Configure PCIe max link speed.
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
Default setting is Auto.
Change OCP PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
for the related devices.
Options available: Disabled, Enabled. Default setting is Enabled.
Configure OCP slot max link speed.
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
Default setting is Auto.
Change MCIO PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
for the related devices.
Options available: Disabled, Enabled. Default setting is Enabled.
Configure MCIO PCIe max link speed.
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
Default setting is Auto.
Enable/Disable U2_P0_G3, root port 2/3/4.
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices.
(Note3)
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
(Note3)
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Disabled, Enabled. Default setting is Enabled.
BIOS Setup
- 61 -