Gigabyte E263-Z30-AAD1 User Manual page 115

Parameter
Data Link Feature Cap
CV test
SEV-SNP Support
Allow Compliance
SRIS
Multi Upstream Auto
Speed Change
Multi Auto Speed Change
On Last Rate
PCIE Link Speed
Capability
RTM Margining Support
EQ Bypass To Highest
Rate
nBif Common Options
Description
Enable/Disable the data link feature capability.
Options available: Enabled, Disabled, Auto. Default setting is Auto.
Enable/Disable the running PCIE CV tool support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable/Disable the SEV-SNP support.
Options available: Disable, Enable. Default setting is Disable.
When enabled, allows the PCIe RP to enter Polling.Compliance state.
Options available: Auto, Disable, Enable. Default setting is Auto.
Options available: Auto, Disable, Enable. Default setting is Auto.
Defines the setting of this feature for all PCIe devices.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Options available: Maximum speed, Gen1, Gen2, Gen3, Gen4, Gen5, Auto.
Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Press [Enter] for configuration of advanced items.
BIOS Setup
- 115 -