Gigabyte E263-Z30-AAD1 User Manual page 57

Parameter
Legacy Console Redirection
Legacy Console Redirection
Settings
Serial Port for Out-of-Band
Management / Windows
Emergency Management
Services (EMS) Console
Redirection
(Note)
Serial Port for Out-of-Band
EMS Console Redirection
Settings
(Note) Advanced items prompt when this item is defined.
Description
Press [Enter] to configure advanced items.
Redirection COM Port
Š
– Selects a COM port for Legacy serial redirection.
– Default setting is COM1/SOL.
Resolution
Š
– Selects the number of rows and columns used in Console
Redirection for legacy OS support.
– Options available: 80x24, 80x25. Default setting is 80x24.
Redirect After POST
Š
– When Bootloader is selected, then Legacy Console Redirection
is disabled before booting to legacy OS. When Always Enable is
selected, then Legacy Console Redirection is enabled for legacy
OS.
– Options available: Always Enable, BootLoader. Default setting is
Always Enable.
EMS console redirection allows the user to configure Console Redirection
Settings to support Out-of-Band Serial Port management.
Options available: Disabled, Enabled. Default setting is Disabled.
Press [Enter] to configure advanced items.
Please note that this item is configurable when Serial Port for Out-of-
Band Management EMS Console Redirection is set to Enabled.
Out-of-Band Mgmt Port
Š
– Microsoft Windows Emergency Management Service (EMS) allows
for remote management of a Windows Server OS through a serial
port.
– Default setting is COM1/SOL.
Terminal Type
Š
– Selects a terminal type to be used for console redirection.
– Options available: VT100, VT100+, ANSI, VT-UTF8. Default setting
is ANSI.
Bits per second
Š
– Selects the transfer rate for console redirection.
– Options available: 9600, 19200, 57600, 115200. Default setting is
115200.
BIOS Setup
- 57 -