Table of Contents
Advertisement
Re-attach the drain hose and secure
4.
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select the Cottons (activate
2.
SpeedPerfect setting) programme.
If your appliance with
Note:
intelligent dosing system
need to deactivate the intelligent
dosing system.
Select the Start/Reload/Pause
3.
button. Allow the programme to run
for approx. 40 seconds.
Turn the programme selector to Off.
4.
Pull out the mains plug.
5.
Clean the filters:
Disconnect the hose from the rear of
1.
the appliance.
Use pliers to remove the filter.
2.
*
Depending on the module
Faults and what to do about them
3.
4.
*
, you also
3
E mergency release
F a u l t s a n d w h a t t o d o a b o u t t h e m
E.g. power outage or in the event of a
loss of power
The programme continues when the
power supply is restored.
However, if the laundry has to be
removed, the appliance door can be
opened as follows:
:
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot water
and laundry.
If possible, leave it to cool down first.
Clean the filter with a small brush.
Connect the hose and check for
leaks.
Faults and what to do
about them
Warning
en
43
Advertisement
Table of Contents
