Bosch WGA244ZRME User Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WGA244ZRME
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WGA244ZRME

  • Page 1 Washing machine WGA244ZRME [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Further information and explanations are available online: Table of contents 1 Safety ...........  4 8 Buttons ........  23 1.1 General information.... 4 9 Programmes ......  25 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories......  29 1.4 Safe installation ...... 5 11 Laundry........  29 1.5 Safe use ........
  • Page 3 15 Basic settings......  34 15.1 Overview of the basic set- tings........ 34 15.2 Changing the basic set- tings........ 35 16 Cleaning and servicing ...  35 16.1 Cleaning the drum.... 35 16.2 Cleaning the detergent drawer........ 35 16.3 Cleaning the drain pump.. 36 17 Troubleshooting......  40 17.1 Emergency release ....
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Never make any technical modifications to the appliance or its features. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶...
  • Page 10: Preventing Material Damage

    en Preventing material damage Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Preventing material damage ATTENTION! able to operate properly.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy...
  • Page 12: Contents Of Package

    en Installation and connection Remove any packaging and pro- 4.3 Requirements for the in- tective covers completely from the stallation location appliance. → "Disposing of packaging", WARNING Page 11 Risk of electric shock! Check the appliance for visible The appliance contains live parts. damage. Touching live parts is dangerous.
  • Page 13: Removing The Transit Bolts

    Installation and connection en Pull the hoses out of the holders. Installation loca- Requirements tion Wooden joist Place the appli- floor ance on a water- resistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Kitchen unit Only install the appliance under- neath a continu-...
  • Page 14: Connecting The Appliance

    en Installation and connection Remove the 4 sleeves. 4.5 Connecting the appliance Connecting the water inlet hose WARNING Risk of electric shock! The appliance contains live parts. Touching live parts is dangerous. Do not immerse the electrical ▶ AquaStop valve in water. Connect the water inlet hose to a tap (26.4 mm = 3/4").
  • Page 15: Aligning The Appliance

    Installation and connection en 4.6 Aligning the appliance Siphon Secure the con- nection point with In order to reduce noise and vibra- a (24–40 mm) tion and to prevent the appliance hose clamp. from moving, align the appliance cor- rectly. Use a WAF 17 wrench to loosen the lock nuts in a clockwise direc- Sink Fix and secure...
  • Page 16 en Installation and connection Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight. In doing so, hold the foot tight and do not adjust its height.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 18: Control Panel

    en Familiarising yourself with your appliance Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 30 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash and soaking 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
  • Page 19: Before Using For The First Time

    Before using for the first time en Add washing powder that contains Before using for the first time 6 Before using for the a bleaching agent to compart- ment II. first time Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor-...
  • Page 20: Display

    en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 23 Recommendation for the maximum load capacity for the selected program in kg.
  • Page 21 Display en Display Description Wash Programme status Rinse Programme status Spin Programme status Program end Programme status Steaming Programme status ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 33 The crease-reduction function is activated.
  • Page 22 en Display Display Description The stain type is activated. Flashes: Drum cleaning is required. Run the ⁠   Drum Clean programme for cleaning and caring for the drum and the outer tub. → "Cleaning the drum", Page 35 ⁠ Flashes: The voltage control system has paused the pro- gramme due to impermissible voltage drops.
  • Page 23: Buttons

    Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information ⁠   Start/Reload ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ⁠   Speed Perfect ¡ Activate Activate or deactivate a shorter pro- gramme duration.
  • Page 24: Programmes

    en Buttons Button Selection More information ⁠   Pretreatment (Prewash) Selecting activates the Prewash ¡ programme. (Soaking) ¡ Prewash for washing heavily soiled laundry. Selecting activates the Soaking programme. Before the main wash cycle starts, the laundry remains in the water for longer.
  • Page 25 Programmes en Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cottons  Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate ⁠...
  • Page 26 en Programmes Programme Description Max. load (kg) Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm ⁠   Wool  Hand- or machine-washable items that are made from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool.
  • Page 27 Programmes en Programme Description Max. load (kg) Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm ⁠   Steam Suitable for shirts, T-shirts and similar fabrics made (Easy Ironing from cotton, linen or blended fabrics. Steam Assisted) Programme for warming and steaming dry items using steam in order to hang them up once the programme has ended or to make them easier to iron.
  • Page 28 en Programmes Programme Description Max. load (kg) ¡ If you regularly wash at temperatures of 40 °C or lower ¡ After a prolonged period of non-use Use washing powder that contains bleach. Add the washing powder containing bleach to compartment II for the main wash. → "Detergent drawer", Page 17 Halve the amount of detergent to avoid foaming.
  • Page 29: Preparing The Laundry

    Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 51. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx.
  • Page 30: Detergents And Care

    en Detergents and care products If required, adjust the programme Detergents and care products 12 Detergents and care settings. → "Adjusting the programme set- products tings", Page 30 The manufacturer's instructions for Detergents and care products use and dosage can be found on the 13.3 Adjusting the pro- packaging.
  • Page 31: For Liquid Detergent

    Basic operation en Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. Insert the detergent drawer. Push in the detergent drawer. 13.6 Use the measuring aid 13.7 Adding detergent and for liquid detergent...
  • Page 32: Starting The Programme

    en Childproof lock Remove the laundry. 13.8 Starting the programme → "Unloading the laundry", Requirement: A programme is set. Page 32 → "Setting a programme", Page 30 13.11 Unloading the laundry Press ⁠   Start/Reload. ▶ a The drum rotates and load detec- Open the door. tion takes place. This can take up Remove the laundry from the to 2 minutes, after which water drum.
  • Page 33: Deactivating The Childproof Lock

    Childproof lock en a The childproof lock remains active even after the appliance has been switched off and in the event of a power cut. 14.2 Deactivating the child- proof lock Requirement: To deactivate the childproof lock, the appliance must be switched on. Press and hold the two ⁠...
  • Page 34: Basic Settings

    en Basic settings Basic settings 15 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
  • Page 35: Changing The Basic Set- Tings

    Cleaning and servicing en 15.2 Changing the basic set- Cleaning and servicing 16 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. Cleaning and servicing ciently for a long time, it is important to clean and maintain it carefully.
  • Page 36: Cleaning The Drain Pump

    en Cleaning and servicing Press down on the insert and re- Fit the insert and click it into place. move the detergent drawer. Clean the opening for the deter- Pull out the insert upwards. gent drawer. Clean the detergent drawer and in- Push in the detergent drawer.
  • Page 37 Cleaning and servicing en Open and remove the mainten- CAUTION - Risk of scalding! ance flap. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
  • Page 38 en Cleaning and servicing Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 36 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
  • Page 39 Cleaning and servicing en Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied the drain pump. Open the water tap. Insert the mains plug. Switch on the appliance.
  • Page 40: Troubleshooting

    en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 41 Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 42 en Troubleshooting Fault Cause and troubleshooting "E:35 / -10" Call the after-sales service. ▶ → "Customer Service", Page 51 flashes. The automatic voltage control system detects an un- authorised voltage drop. No remedial action possible. ▶ Note: If the power supply is stable, the programme continues to run as normal.
  • Page 43 Troubleshooting en Fault Cause and troubleshooting All other error codes. Malfunction Switch the appliance off and then on again. If the message appears again, disconnect the appli- ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relev- ant circuit breaker in the fuse box.
  • Page 44 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Drain pipe or water outlet hose is blocked. ing. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
  • Page 45 Troubleshooting en Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
  • Page 46 en Troubleshooting Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 47 Troubleshooting en Fault Cause and troubleshooting Loud noises during Secure the appliance feet. ▶ the spin cycle. → "Aligning the appliance", Page 15 Transit bolts have not been removed. → "Removing the transit bolts", Page 13. ▶ Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 36 ▶...
  • Page 48 en Troubleshooting Fault Cause and troubleshooting The spin result is not Note: Where possible, mix large and small items in satisfactory. The laun- the drum. Different sized items of laundry distribute dry is too wet/too themselves better during the spin cycle. damp. Start the Spin programme.
  • Page 49 Troubleshooting en Fault Cause and troubleshooting Fabric softener re- The use of fabric softener is not supported for the se- mains in the detergent lected programme. drawer. Before washing, check whether the use of fabric ▶ softener is supported for the selected programme. → "Programmes", Page 25 Water is leaking from Dirt on the door or seal causes leaks.
  • Page 50: Emergency Release

    en Transportation, storage and disposal 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 36 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
  • Page 51: Disposing Of Old Appliance

    Customer Service en 18.4 Disposing of old appli- Customer Service 19 Customer Service ance Detailed information on the warranty Customer Service Valuable raw materials can be re- period and terms of warranty in your used by recycling. country is available from our after- sales service, your retailer or on our WARNING website.
  • Page 52 en Customer Service from water damage, the appliance must be connected to the power supply. ¡ The liability guarantee is valid for the service life of the appliance. ¡ A claim can only be made under the guarantee if the appliance has been correctly installed and con- nected with Aqua-Stop according to our instructions;...
  • Page 53: Consumption Values

    Consumption values en Consumption values 20 Consumption values The indicated consumption values are approximate. Consumption values The values may deviate from the indicated values depending on water pres- sure, water hardness, water inlet temperature, room temperature, type of laun- dry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings.
  • Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents