Nothing Prints; Print Head Moves But Nothing Prints - Epson SureColor T7770D Series User Manual

Nothing Prints

If you have sent a print job and nothing prints, try these solutions:
• Make sure your printer is turned on.
• Make sure there are no error messages on the product's LCD screen.
• Make sure any interface cables are connected securely at both ends. If you have a spare cable, try
connecting with the spare cable.
• Check the model and specifications of the interface cable to see if the cable is appropriate for your
computer and printer.
• If you connected your printer to a USB hub, make sure it is a first-tier hub. If it still does not print,
connect your printer directly to your computer instead of the hub.
• Make sure the USB hub is recognized correctly on the computer. Disconnect all USB hubs from the
computer and connect the printer directly to the computer's USB port.
• If you have an optional print server connected to the printer, make sure you are not saving the print job
to the hard drive.
• Make sure the USB cable length does not exceed 10 feet (3 m).
Parent topic:
Related references
Interface Specifications

Print Head Moves But Nothing Prints

If the print head is moving and nothing prints, try these solutions:
• Print a nozzle check pattern. If the pattern does not print correctly, clean the print head again. (If the
printer has not been used for a long time the nozzles may be clogged.)
• If you see the message Motor Self Adjustment on the product's LCD screen, the printer is adjusting
its internal motor. Wait a few moments for the message to disappear and do not turn off the printer.
Parent topic:
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Solving Printing Problems
Solving Printing Problems
337