Epson SureColor T7770D Series User Manual page 74

14. Push down the lock lever on the roll paper holder to lock it in place.
15. On the LCD screen, select Paper Setting > Roll 2 > Paper Type and select the paper type that
matches the loaded paper.
Note: It is important to select the correct media type for each loaded media. Most Epson media will
be loaded with the driver installation. If the paper type is not displayed on the control panel or in the
printer driver, you can create a custom paper setting using the control panel, Epson Media Installer,
or Epson Edge Print. (For details on how to use Epson Edge Print, see the Epson Edge Print
manual.)
For non-Epson media, consult the manufacturer's website for appropriate media types. If the roll
paper has a barcode printed on it, the printer reads it and automatically loads the correct settings. If
you do not select settings within 90 seconds, the printer uses the displayed settings automatically.
16. To track the amount of paper remaining on the roll (recommended), do the following:
• Select Roll 1 > Paper Remaining and set Remaining Amount Management to On.
• Select Remaining Amount and enter the length of the roll paper.
74