Epson SureColor T7770D Series User Manual page 228

Setting
Top Margin
Paper Suction
Paper Size Check
Auto Cut
Roll Core Diameter
Paper Eject Roller
Paper Feed Offset
Restore Default Settings
Options Description
3 mm Select the margin for the leading edge of the
printed image.
15 mm
Depending on the paper type and printing
20 mm
environment, colors may be uneven near the
45 mm
leading edge if the margin is small.
Standard
–3 to +3 Select to adjust the printer's suction setting;
choose lower values for thinner papers
On Select On to detect the paper width when
paper is loaded
Off
Select Off when the paper roll is empty. This
allows you to set the paper width before
feeding the paper.
Follow Paper Source Select Follow Paper Source Settings to
Settings follow the cut settings in Printer Settings >
Paper Source Settings > Roll Paper Setup
Never Cut
> Cut Settings, or select Never Cut to cut
paper manually
2inch Select the paper core size for the loaded roll
paper
3inch
Auto Select to control the paper ejection roller;
select Auto to use the roller automatically
Use
depending on the type of Epson paper; select
Do Not Use
Use to always use the roller to eject paper;
select Do Not Use when you are concerned
about damaging the print surface
–1.0 to 1.50% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
— Restores advanced paper settings to their
default values; not available with custom
paper types
228