Siemens SIMATIC S7-300 Getting Started page 21

Step Activity
2 In the project navigator, select the SIMATIC 300(1) > Technology > AXES > Insert axes entry. Execute this
with a double click to start the axis wizard.
Result: The "Insert axis" dialog box opens.
3 Confirm the default technology selection (speed control,
positioning) with "OK".
4 Accept the "Axis type: Linear, electrical" and "Motor type:
standard motor". Confirm with "Continue".
5 Confirm with "Continue".
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05
3.8 7. Step: Configuring the axis(axes) with S7T Config
Result
The "Axis configuration - Axis_1 – Axis type"
dialog box opens.
The "Axis configuration - Axis_1 - Units"
dialog box opens.
The "Axis configuration - Axis_1 - Modulo"
dialog box opens.
Learning units
21