Siemens SIMATIC S7-300 Getting Started page 24

Learning units
3.8 7. Step: Configuring the axis(axes) with S7T Config
Step Activity
8 Enter the resolution specified on your motor rating plate. The resolution of the encoder in our example is
2048.
Confirm with "Continue".
Result: The "Axis Configuration - Axis_1 - Completion" dialog box opens, showing the data you configured.
9 Click the "Finish" button to end the axis configuration.
10 Select the Project > Save and recompile all menu command
to save the configuration with S7T Config.
Note
Repeat Step 2 to 10 in step number 7 if you are using a second axis.
With a double-axis module, you can only perform the trial run if you have also configured the
second axis.
24
Result
You completed the axis configuration in S7T
Config.
The system now compiles the axis
configuration data.
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05