Factory Reset - Datasensing SH4 STANDARD MUTING Product Reference Manual

FUNCTIONS

FACTORY RESET

Factory reset allows to reset automatic cascade topology detection on Receiver (RX)
unit, stored in flash for safety reasons.
To perform a factory reset follow the next steps:
1. Turn OFF the Safety Light Curtain
2. Set dip switch bank A all OFF
3. Set dip switch bank B all ON
4. Power ON the Safety Light Curtain
5. The Factory Reset signal is shown (See "User Interface Dialogue" on page 61.)
6. Power OFF the Safety Light Curtain
7. Setting the Dip-switches (bank A and bank B) according to the desired configura-
8. Power ON the Safety Light Curtain
When reset is performed relative user interface indication is visualized.
38
SH4 STANDARD MUTING
tion (see "Dip Switches" on page 36)