Page 1 2013 E-SERIES fordowner.com ford.ca DC2J 19A321 AA February 2013 Second Printing Owner’s Manual E-Series Litho in U.S.A.
Page 2: Table Of Contents
Table of Contents Introduction Child Safety Child seats ......... . .19 Child seat positioning .
Page 3 Table of Contents Lighting Lighting control ........68 Instrument lighting dimmer.
Page 4: Table Of Contents
Table of Contents Seats Sitting in the correct position ......105 Head restraints........106 Manual seats .
Page 5 Table of Contents Parking Aids Sensing system........145 Rear-view camera system .
Page 6: Table Of Contents
Table of Contents Maintenance General information ........204 Opening and closing the hood .
Page 7 Accessories .........294 Ford Extended Service Plan Scheduled Maintenance Normal scheduled maintenance and log .
Page 8: Table Of Contents
Errors and omissions excepted. © Ford Motor Company 2012 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012...
Page 9: Introduction
Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
Page 10 Introduction SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert...
Page 11 In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may...
Page 12 EDR. Ford Motor Company and Ford of Canada do not access event data recorder...
Page 13 If you do not want Ford or its vendors to receive this information, do not activate the service. Ford Motor Company and the vendors it uses to provide you with this information do not store your vehicle travel information.
Page 14 Introduction FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as well as help manage your account.
Page 15 Using your vehicle as an ambulance If your light truck is equipped with the Ford Ambulance Preparation Package, it may be utilized as an ambulance. Ford urges ambulance manufacturers to follow the recommendations of the Ford Incomplete Vehicle Manual, Ford Truck Body Builder’s Layout Book and the...
Page 16 Introduction Use of your Ford light truck as an ambulance, without the Ford Ambulance Preparation Package voids the Ford New Vehicle Limited Warranty and may void the Emissions Warranties. In addition, ambulance usage without the preparation package could cause high underbody temperatures, overpressurized fuel and a risk of spraying fuel which could lead to fires.
Page 17 Introduction EXPORT UNIQUE (NON–UNITED STATES/CANADA) VEHICLE SPECIFIC INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this owner’s manual. A market unique supplement may be supplied that complements this book.
Page 18: Child Safety
NHTSA and other safety organizations, or are the minimum requirements of law. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician and consulting your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in your vehicle.
Page 19 Child Safety Recommendations for Safety Restraints for Children Recommended Child size, height, weight, or age restraint type Infants Children weighing 40 lb (18 kg) or less Use a child safety (generally age four or younger). seat (sometimes toddlers called an infant carrier, convertible seat, or toddler seat).
Page 20: Child Seats
Child Safety CHILD SEATS Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag.
Page 21 Child Safety WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood of injury or death in a crash. WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury.
Page 22: Booster Seats
Child Safety BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
Page 23 Child Safety Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat.
Page 24 Child Safety Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder.
Page 25: Installing Child Safety Seats
Child Safety INSTALLING CHILD SEATS Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the way back.
Page 26 Child Safety 1. Position the child safety seat in a seat with a combination lap and shoulder belt. 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together. 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat...
Page 27 Child Safety 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.
Page 28 There should be no more than 1 inch (2.5 cm) of movement for proper installation. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) to make certain the child restraint is properly installed.
Page 29 Child Safety LATCH compatible child safety seats have two rigid or webbing mounted attachments that connect to the two lower anchors at the LATCH equipped seating positions in your vehicle. This type of attachment method eliminates the need to use safety belts to attach the child seat, however the safety belt can still be used to attach the child seat.
Page 30 Child Safety • Seven passenger wagon • Eight passenger wagon • Eleven passenger wagon 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 31 Child Safety • Twelve passenger wagon • Fifteen passenger wagon The LATCH lower anchors are located at the rear section of the rear seat between the cushion and seatback. Follow the child seat manufacturer’s instructions to properly install a child seat with LATCH attachments. Follow the instructions on attaching child safety seats with tether straps.
Page 32 Child Safety Combining Safety Belt and LATCH Lower Anchors for Attaching Child Safety Seats When used in combination, either the safety belt or the LATCH lower anchors may be attached first, provided a proper installation is achieved. Attach the tether strap afterward, if included with the child seat. Using Tether Straps Many forward-facing child safety seats include a tether strap which extends from the back of the child safety seat and hooks...
Page 33 Child Safety 2. Route the child safety seat tether strap over the back of the front right-hand passenger seat as shown. 3. Clip the tether strap hook to the seat pedestal at the location shown. If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a crash.
Page 34 Child Safety 2. Clip the tether strap hook to the seat pedestal at the location shown. If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a crash. 3. Tighten the child safety seat tether strap according to the manufacturer’s instructions.
Page 35 If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use. 2013 Econoline (eco)
Page 36: Safety Belts
Safety Belts PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving.
Page 37 Safety Belts WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather;...
Page 38: Fastening The Safety Belts
Safety Belts FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
Page 39 Safety Belts Pregnant women should always wear their safety belts. The lap belt portion of a combination lap and shoulder belt should be positioned low across the hips below the belly and worn as tight as comfort will allow. The shoulder belt should be positioned to cross the middle of the shoulder and the center of the chest.
Page 40 Safety Belts Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions.
Page 41: Safety Belt Height Adjustment
Safety Belts SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a crash. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.
Page 42: Safety Belt-Minder
Safety Belts SAFETY BELT-MINDER® This feature supplements the safety belt warning function by providing additional reminders by intermittently sounding a chime and illuminating the safety belt warning light when the driver’s seat is occupied and the safety belt is unbuckled. If...
Page 43 Safety Belts Deactivating and Activating the Belt-Minder® Feature WARNING: While the design allows you to deactivate your Belt-Minder®, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the Belt-Minder® system activated for yourself and others who may use the vehicle.
Page 44: Child Restraint And Safety Belt Maintenance
Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.
Page 45: Supplementary Restraints System
Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
Page 46 Supplementary Restraints System The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys.
Page 47: Driver And Passenger Airbags
Supplementary Restraints System DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury.
Page 48 Supplementary Restraints System To properly position yourself away from the airbag: • Move your seat to the rear as far as you can while still reaching the pedals comfortably. • Recline the seat slightly (one or two degrees) from the upright position.
Page 49 Supplementary Restraints System Passenger Airbag ON and OFF Switch (If Equipped) WARNING: An airbag ON and OFF switch may have been installed in this vehicle. Before driving, always look at the face of the switch to be sure the switch is in the proper position in accordance with these instructions and warnings.
Page 50 Supplementary Restraints System Turning the Passenger Airbag Back On WARNING: The safety belts for the driver and right front passenger seating positions have been specifically designed to function together with the airbags in certain types of crashes. When you turn off your airbag, you not only lose the protection of the airbag, you also may reduce the effectiveness of your safety belt system, which was designed to work with the airbag.
Page 51 Supplementary Restraints System The passenger side airbag should always be on (the airbag OFF light should not be illuminated) unless the passenger is a person who meets the requirements stated either in Category 1, 2 or 3 of the NHTSA/Transport Canada deactivation criteria which follows. The vast majority of drivers and passengers are much safer with an airbag than without.
Page 52 Supplementary Restraints System • the infant has a medical condition which, according to the infant’s physician, makes it necessary for the infant to ride in the front so that the driver can constantly monitor the child’s condition. 2. Child age 1 to 12. A child age 1 to 12 must ride in the front seat because: •...
Page 53: Crash Sensors And Airbag Indicator
Supplementary Restraints System 1. Infant: An infant (less than 1 year old) must ride in the front seat because: • my vehicle has no rear seat; • the rear seat in my vehicle cannot accommodate a rear-facing infant seat; or •...
Page 54: Airbag Disposal
Supplementary Restraints System The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. See the Instrument Cluster chapter.
Page 55: Keys And Remote Control
Keys and Remote Control GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 56 Keys and Remote Control Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Replacing the battery will not delete the remote control from your vehicle. The remote control should operate normally after battery replacement. The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent.
Page 57: Replacing A Lost Key Or Remote Control
Keys and Remote Control Car Finder Press the button twice within three seconds. The horn will sound and the turn signals will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Press the button to activate the alarm.
Page 58: Locks
Locks LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock the vehicle. Power Door Locks (If Equipped) The power door lock control is located on the driver and front passenger door panels.
Page 59 Locks Autolock and Unlock Note: Your vehicle comes with this feature disabled. The autolock feature will lock all the doors when: • all doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and •...
Page 60 Locks Illuminated Entry The interior lamps and parking lamps illuminate when the remote entry system is used to unlock the doors or sound the personal alarm. The illuminated entry system will turn off the lights if: • the ignition is switch on •...
Page 61 Locks System Procedure – Power Door Locks • Lock the vehicle with the key, manual door lock, remote control or use the power door lock on the front door trim panel. The front doors are locked and the cargo doors are double-locked. •...
Page 62 Locks The emergency handles are located in the following areas: • The side door emergency handle is located on the door inner trim panel in the speaker cup. • The rear door handle is located in the rear door below the glass. To open the side or rear cargo doors from the inside: 1.
Page 63: Security
Security SECURILOCK® PASSIVE ANTI-THEFT SYSTEM (IF EQUIPPED) Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting the engine.
Page 64 Security Replacement Keys If your keys are lost or stolen and you do not have an extra coded key, you will need to have your vehicle towed to an authorized dealer. The key codes need to be erased from your vehicle and new coded keys will need to be programmed.
Page 65 Security If the key was not successfully programmed, it will not start your vehicle’s engine and the theft indicator light will flash rapidly. Wait 20 seconds and repeat Steps 1 through 8. Take your vehicle to your authorized dealer to have the new key programmed if you are still unsuccessful.
Page 66: Steering Wheel
Steering Wheel ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. 1. Pull and hold the steering wheel release lever. 2. Adjust the steering wheel to the desired position then release the lever. VOICE CONTROL (IF EQUIPPED) A.
Page 67: Wipers And Washers
Wipers and Washers WINDSHIELD WIPERS Note: Fully defrost the windshield before turning on the windshield wipers. Note: Make sure the windshield wipers are turned off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Page 68 Wipers and Washers • A brief press causes a single wipe without washer fluid. • A quick press and hold causes the wipers to swipe three times with washer fluid. • A long press and hold will activate the wipers and washer fluid for up to 10 seconds.
Page 69: Lighting
Lighting LIGHTING CONTROL The first position turns the lamps off. The second position turns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. The third position turns the headlamps on. High Beams • Push the lever toward the instrument panel to activate.
Page 70: Instrument Lighting Dimmer
Lighting INSTRUMENT LIGHTING DIMMER Note: If you disconnect the battery or it becomes discharged, the dimmer switch will require re-calibration. Rotate the dimmer switch from the full dim position to the full dome/on position to reset. Note: Move the control to the full upright position, past detent, to turn on the interior lamps.
Page 71: Turn Signal Control
Lighting TURN SIGNAL CONTROL • Push down to activate the left turn signal. • Push up to activate the right turn signal. INTERIOR LAMPS Dome Lamps with Rear Headliner (If Equipped) Dome lamps equipped with an on/off control will light when: •...
Page 72 Lighting Cargo Lamps Cargo lamps equipped with an on/off control will light when: • doors are closed and the control is moved to the right ON position • control is in the middle position and any door is open • panel dimmer control is moved to the full upright position past the detent When the control is moved to the left OFF position, it will not illuminate...
Page 73: Windows And Mirrors
Windows and Mirrors POWER WINDOWS (IF EQUIPPED) WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Page 74 Windows and Mirrors To adjust your mirrors: 1. Select the mirror you want to adjust. 2. Move the control in the direction you want to tilt the mirror. 3. Return the control to the center position to lock mirrors in place. Fold-Away Exterior Mirrors The mirrors can be manually folded forward or backward.
Page 75 Windows and Mirrors On Telescoping Mirror You can tilt the spotter mirror up or down and also left or right to increase visibility. Integrated Blind Spot Mirrors (If Equipped) WARNING: Objects in the blind spot mirror are closer than they appear.
Page 76: Interior Mirrors
Windows and Mirrors The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A).
Page 77: Sun Visors
Windows and Mirrors SUN VISORS Illuminated Visor Vanity Mirror (If Equipped) Lift the cover to switch on the lamp. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 78: Instrument Cluster
Instrument Cluster GAUGES Cluster shown in standard measure. Metric similar. A. Tachometer B. Fuel gauge C. Engine coolant temperature gauge D. Speedometer E. Battery voltage gauge F. Information display. See Information displays for more information. G. Engine oil pressure gauge Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on).
Page 79: Warning Lamps And Indicators
Instrument Cluster Engine Coolant Temperature Gauge Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop the vehicle as soon as safely possible, switch off the engine and let the engine cool. WARNING: Never remove the coolant reservoir cap while the engine is running or hot.
Page 80 Instrument Cluster Airbag – Front If it fails to illuminate on startup, continues to flash or remains on, it indicates a malfunction. Have the system checked by your authorized dealer. A chime will sound when there is a malfunction in the indicator light. Anti-Lock Braking System If it illuminates when you are driving, this indicates a malfunction.
Page 81 Instrument Cluster Charging System It will illuminate when the 12–volt battery is not charging properly. Contact your authorized dealer as soon as possible. This indicates a problem with the electrical system or a related component. Check Fuel Cap Displays when the fuel cap may not be properly installed. Continued driving with this light on may cause the Service Engine Soon warning light to come on.
Page 82 Instrument Cluster Low Fuel Level It will illuminate when the fuel level is low or near empty. Refuel as soon as possible. Low Tire Pressure Warning It will illuminate when your tire pressure is low. If the lamp remains on with the engine running or when driving, check your tire pressure as soon as possible.
Page 83: Audible Warnings And Indicators
Instrument Cluster WARNING: Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire. Stability Control System Displays when the AdvanceTrac®/Traction control is active. If the light remains on, have the system serviced immediately.
Page 84: Information Displays
GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
Page 85 Information Displays System Check and Vehicle Feature Customization Note: When returning to the setup menu and a non-English language has been selected, HOLD RESET FOR ENGLISH will be displayed to change back to English. Press and hold the SELECT/RESET stem to change back to English.
Page 86 Information Displays • OIL LIFE XXX% HOLD RESET = NEW: This displays the remaining oil life. An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change, perform the following: 1.
Page 87 Information Displays Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 2. Press and release the SELECT/RESET stem to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
Page 88: Information Messages
Information Displays 4. Press and hold the SELECT/RESET stem until the message center displays CIRCLE SLOWLY TO CALIBRATE. 5. Slowly drive the vehicle in a circle less than 3 mph (5 km/h ) until the CIRCLE SLOWLY TO CALIBRATE message changes to CALIBRATION COMPLETED.
Page 89 Information Displays Brake System Action / Description Messages BRAKE FLUID Indicates the brake fluid level is low and the brake system should be inspected immediately. LEVEL LOW Refer to Brake fluid in the Maintenance chapter. CHECK BRAKE Displayed when the brake system needs servicing.
Page 90 Information Displays Tire Messages Action / Description TIRE PRESSURE Displayed when a tire pressure sensor is malfunctioning, or your spare tire is in use. SENSOR FAULT For more information on how the system operates under these conditions. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible.
Page 91 Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed.
Page 92 Audio System MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode. •...
Page 93: Audio System Am/Fm Stereo
Audio System AM/FM AUDIO WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 94: Am/Fm/Cd With Sync
Audio System E. Memory presets: Store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns. F. AM/FM: Press this button to select a frequency band and access media through the auxiliary input jack.
Page 95 Audio System D. Phone: Press this button to access the phone features of the SYNC® system. See the SYNC® chapter for more information. E. MENU: Press this button to access different audio system features. • If your vehicle is equipped with satellite radio, you can access different menus by pressing OK.
Page 96: Auxiliary Input Jack
Audio System M. REW: Press this button to manually rewind in a CD track or MP3 file. N. Memory presets: Store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns.
Page 97 Audio System WARNING: Store the portable music player in a secure location, such as the center console or the glove box, when your vehicle is moving. Hard objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury. The audio extension cable must be long enough to allow the portable music player to be safely stored while your vehicle is moving.
Page 98: Usb Port
Audio System USB PORT (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 99 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 100 Audio System Satellite Radio Electronic Serial Number (ESN) You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, you can view this number by pressing SIRIUS and memory preset 1 at the same time. To access your ESN, press the bottom left corner of the touchscreen, then SIRIUS >...
Page 101 Audio System Radio display Condition Possible action Call SIRIUS Your satellite service is Call SIRIUS at 1–888–539–7474 no longer available. 1–888–539–7474 to resolve subscription issues. None Found. Check All the channels in the Use the channel guide Channel Guide. selected category are to turn off the Lock or either skipped or Skip function on that...
Page 102: Climate Control
Climate Control HEATER ONLY SYSTEM VENT COOL WARM A. Fan speed control: Controls the volume of air circulated in your vehicle. Adjust to select the desired fan speed or switch off. If you switch the fan off, the windshield may fog up. B.
Page 103 Climate Control MANUAL CLIMATE CONTROL VENT NORM COOL WARM A. Fan speed control: Controls the volume of air circulated in your vehicle. Adjust to select the desired fan speed or switch off. If you switch the fan off, the windshield may fog up. B.
Page 104 Climate Control REAR FAN SPEED CONTROL (IF EQUIPPED) REAR Controls the volume of air circulated in the rear of your vehicle. Adjust to select the desired fan speed or switch off. HINTS ON CONTROLLING THE INTERIOR CLIMATE General Hints Note: A small amount of air may be felt from the footwell air vents regardless of the air distribution setting.
Page 105 Climate Control Cooling the Interior Quickly Adjust the fan speed to the highest speed setting initially, then adjust to the desired comfort level. Adjust the temperature control to the lowest temperature setting. Adjust the air distribution control to MAX A/C. Recommended Settings for Cooling Adjust the fan speed to the second speed setting.
Page 106: Seats
Seats SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seat back, with your feet on the floor.
Page 107: Head Restraints
Seats Make sure that your driving position is comfortable and that you can maintain full control of your vehicle. HEAD RESTRAINTS WARNING: To minimize the risk of neck injury in the event of a crash , the driver and passenger occupants should not sit in and operate the vehicle until the seat back is placed in its proper position.
Page 108 Seats Moving the Seats Backward and Forward (If Equipped) Recline Adjustment (If Equipped) WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. After returning the seat back to its original position, pull on the seat back to make sure that it has fully latched.
Page 109: Power Seats
Seats POWER SEATS WARNING: Never adjust the driver’s seat when the vehicle is moving. The control is located on the outboard side of the seat cushion. Press A to raise or lower the front portion of the seat cushion. Press B to move the seat forward, backward, up or down.
Page 110 Seats Quick-Release Captains Chair (Seven Passenger Configuration-Second Row Only) WARNING: Check to see that the seat and seat back is latched securely in position. Keep floor area free of objects that would prevent proper seat engagement. Never attempt to adjust the seat while the vehicle is in motion.
Page 111 Seats To install the seat: 1. Position the seat to the floor mount. 2. Pull the seat latch handle downward to lock the seat in position. 3. Make sure the safety belt is not twisted, then insert the safety belt tongue into the detachable anchor until you hear a click and feel the latch engage.
Page 112 Seats 3. Clip the end of the belt to the stationary portion of the shoulder belt coming out of the trim panel. The end of the shoulder belt must be clipped in order to keep it from striking anything during vehicle operation.
Page 113 Seats To install the seat: 1. Make sure the floor striker area is clean of any debris that would prevent the seat from latching. 2. With assistance, position the seat in the vehicle. 3. Align the front hooks to the front striker pins prior to lowering the rear latch mechanism and aligning them with the rear striker pins.
Page 114: Auxiliary Power Points
Auxiliary Power Points AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fire or serious injury. Note: If used when the engine is not running, the battery will discharge.
Page 115 Auxiliary Power Points 110 Volt AC Power Point (If Equipped) WARNING: Do not keep electrical devices plugged in the powerpoint whenever the device is not in use. Do not use any extension cord with the 110 volt AC power point, since it will defeat the safety protection design.
Page 116 Auxiliary Power Points The power point can provide power whenever the ignition is on and the indicator light is on. The indicator light is located in the top left corner of the power point. When the indicator light is: • on — power point is ready to supply power •...
Page 117: Starting And Stopping The Engine
Starting and Stopping the Engine GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover.
Page 118 Starting and Stopping the Engine A. Accessory: Allows the electrical accessories, such as the radio, to operate while the engine is not running. B. Lock: Locks the automatic transmission gearshift lever and allows key removal. C. Off: Shuts off the engine and all accessories without locking the steering wheel.
Page 119 Starting and Stopping the Engine If you have difficulty starting the engine when the temperature is below -13°F (-25°C), press the accelerator pedal slightly and try again. If you cannot start your engine after three attempts, wait 10 seconds, then follow this procedure: 1.
Page 120: Engine Block Heater
Starting and Stopping the Engine Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects.
Page 121 Starting and Stopping the Engine • Make sure that when in operation, the extension cord plug and the heater cord plug connections are free and clear of water. This could cause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear of combustibles.
Page 122: Fuel And Refueling
Fuel and Refueling IMPORTANT SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap.
Page 123 Fuel and Refueling Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materials and any open flames before fueling your vehicle. • Always turn off the vehicle before fueling. • Automotive fuels can be harmful or fatal if swallowed. Fuels such as gasoline and ethanol are highly toxic and if swallowed can cause death or permanent injury.
Page 124: Fuel Quality
Fuel and Refueling During the summer season, fuel ethanol may contain a maximum of 85% denatured ethanol (Ed85) and 15% unleaded gasoline. The fuel ethanol has a higher octane rating than unleaded regular or premium gasoline and this allows the design of engines with greater efficiency and power. Winter blends may contain up to 75% denatured ethanol (Ed75) and up to 25% unleaded gasoline to enhance cold engine starts.
Page 125: Running Out Of Fuel
Fuel and Refueling It is best not to alternate repeatedly between gasoline and E85. If you do switch fuels, it is recommended that you add as much fuel as possible—at least half a tank. Do not add less than five gallons (18.9 liters) when refueling.
Page 126: Refueling
Fuel and Refueling REFUELING WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island. • Turn off your engine when you are refueling. •...
Page 127: Fuel Consumption
Ford, Motorcraft® or other certified fuel filler cap is not used. Your fuel tank filler cap has an indexed design with a 1/4 turn on/off feature.
Page 128 Fuel and Refueling For consistent results when filling the fuel tank: • Turn the ignition off before fueling; an inaccurate reading results if the engine is left running. • Use the same fill rate (low–medium–high) each time the tank is filled. •...
Page 129 Information are essential to the life and performance of your vehicle and to its emissions system. If other than Ford, Motorcraft® or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
Page 130 Fuel and Refueling On-board Diagnostics (OBD-II) Your vehicle is equipped with a computer that monitors the engine’s emission control system. This system is commonly known as the on-board diagnostics system (OBD-II). The OBD-II system protects the environment by ensuring that your vehicle continues to meet government emission standards.
Page 131 Fuel and Refueling Readiness for Inspection/Maintenance (I/M) Testing Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced.
Page 132: Transmission
Transmission AUTOMATIC TRANSMISSION OPERATION Understanding the Gearshift Positions of the 4–Speed Automatic Transmission WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the lock position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducing fuel usage during coasting or deceleration.
Page 133 Transmission R (Reverse) With the gearshift lever in R (Reverse), the vehicle will move backward. Always come to a complete stop before shifting into and out of R (Reverse). N (Neutral) With the gearshift lever in N (Neutral), the vehicle can be started and is free to roll.
Page 134 Transmission Drive (not shown) Drive is activated when the transmission control switch is pressed. • This position allows for all forward gears except overdrive. • O/D OFF lamp is illuminated. • Provides engine braking. • Use when driving conditions cause excessive shifting from O/D to other gears.
Page 135 Transmission Understanding the Shift Positions of the 5–Speed Automatic Transmission (If Equipped - 5.4L and 6.8L Gasoline Engines Only) WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the lock position and remove the key whenever you leave your vehicle.
Page 136 Transmission N (Neutral) With the gearshift lever in N (Neutral), the vehicle can be started and is free to roll. Hold the brake pedal down while in this position. D (Drive with Overdrive) with Tow/Haul off D (Overdrive) with tow/haul off is the normal driving position for the best fuel economy.
Page 137 Transmission 3 (Third) Transmission starts and operates in third gear only. Used for improved traction on slippery roads. Selecting 3 (Third) provides engine braking. 2 (Second) Use 2 (Second) to start-up on slippery roads or to provide additional engine braking on downgrades. 1 (First) •...
Page 138 Transmission If you cannot move the gearshift lever out of P (Park) with the ignition in the on position and the brake pedal pressed, it is possible that a fuse has blown or the vehicle’s brake lamps are not operating properly. Refer to Fuses chapter.
Page 139 Transmission Automatic Transmission Adaptive Learning This feature is designed to increase durability and provide consistent shift feel over the life of the vehicle. A new vehicle or transmission may have firm shifts, soft shifts or both. This operation is considered normal and will not affect function or durability of the transmission.
Page 140: Brakes
Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out and should be inspected by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, you should take it to an authorized dealer for inspection.
Page 141: Hints On Driving With Anti-Lock Brakes
Brakes HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal. The anti-lock braking system will not eliminate the dangers inherent when: •...
Page 142: Traction Control
Traction Control PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Page 143 Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac® system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac®...
Page 144: Stability Control Advancetrac
Stability Control A Vehicle without AdvanceTrac® with RSC® skidding off its intended route. B Vehicle with AdvanceTrac® with RSC® maintaining control on a slippery surface. USING ADVANCETRAC® WITH RSC® (IF EQUIPPED) The system automatically activates when you start your engine. The AdvanceTrac®...
Page 145 Stability Control AdvanceTrac® with RSC® Features Stability Button TCS OFF control RSC®/ESC functions light light Illuminated Illuminated Default at during bulb during bulb Enabled Enabled start-up check check Disabled Button pressed Illuminated below Enabled momentarily illuminated solid 20 mph (32 km/h) Button pressed again after deactivation or...
Page 146: Parking Aids
Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system;...
Page 147: Rear-View Camera System
Parking Aids Using the Rear Sensing System The rear sensors are only active when the transmission is in R (Reverse). As the vehicle moves closer to the obstacle, the rate of the audible warning increases. When the obstacle is fewer than 10 inches (25 centimeters) away, the warning sounds continuously.
Page 148 Parking Aids WARNING: Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle. WARNING: Use caution when using the rear video camera and the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect.
Page 149 Parking Aids Note: When towing, the camera only sees what is being towed behind the vehicle. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. In some vehicles, the guidelines may disappear once the trailer tow connector is engaged.
Page 150 Parking Aids A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Yellow zone D. Fixed guideline: Green zone E. Centerline The fixed guidelines fade in and out depending on the steering wheel position. Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are further away.
Page 151 Parking Aids Note: When manual zoom is enabled, only the centerline is shown. Allows the driver to get a closer view of an object behind the vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in R (Reverse), When the transmission is shifted out of R (Reverse), the feature automatically turns off and must be reset when it is used again.
Page 152: Cruise Control
Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL (IF EQUIPPED) WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up or down a steep hill.
Page 153 Cruise Control Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press and hold SET ACCEL to increase or COAST to decrease the set speed.
Page 154: Driving Aids
Driving Aids STEERING To help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than a few seconds when the engine is running. • Do not operate the vehicle with a low power steering pump fluid level (If the fluid level is below the MIN line mark on the dipstick).
Page 155: Load Carrying
Load Carrying LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance.
Page 156 Load Carrying WARNING: The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available.
Page 157 Load Carrying Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) –...
Page 158 Load Carrying GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position.
Page 159 Load Carrying WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer.
Page 160 Load Carrying WARNING: Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification Label. WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with a higher limit than the original tires do not increase the GVWR and GAWR limitations.
Page 161 Load Carrying capacity in your vehicle to transport four friends and your golf bags. In metric units, the calculation would be: 635 kg - (5 x 99 kg) - (5 x 13.5 kg) = 635 - 495 - 67.5 = 72.5 kg. •...
Page 162: Towing
Towing TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
Page 163 Towing RECOMMENDED TOWING WEIGHTS Note: Do not exceed a trailer weight of 5000 pounds (2268 kilograms) when towing with, or by, bumper only. Note: Calculate the maximum trailer weight for all cutaway vehicles by subtracting the weight of your vehicle (including incomplete vehicle weight and payload, which includes second unit body weight, cargo and passengers) from the gross combined weight.
Page 164 Towing Maximum GCWR Maximum trailer Engine Rear axle ratio - lb. (kg) weight - lb. (kg) E-250 Extended, Recreational and Crew van 4.6L 3.73 11500 (5216) 5900 (2540) 4.6L 4.10 12000 (5443) 6400 (2903) 5.4L 3.73 and 4.10 13000 (5897) 7300 (3311) E-350 Regular, Recreational and Crew van 5.4L...
Page 165 Towing Maximum GCWR Maximum trailer Engine Rear axle ratio - lb. (kg) weight - lb. (kg) E-350 Cutaway single rear wheel 158–inch wheelbase 5.4L 4.10 13000 (5896) 8000 (3629) 6.8L 4.10 18500 (8391) 10000 (4536) E-350 Cutaway dual rear wheel 158–inch and 176–inch wheelbase 5.4L 3.73...
Page 166 Towing Remember to account for the trailer tongue weight as part of your vehicle load when calculating the total vehicle weight. Hitches Do not use a hitch that either clamps onto the bumper or attaches to the axle. Distribute the trailer load so 10-15% of the total trailer weight is on the tongue.
Page 167: Trailer Brake Controller-Integrated
1500 pounds (680 kilograms) when loaded. Integrated Trailer Brake Controller (If Equipped) WARNING: The Ford TBC has only been verified to be compatible with trailers having electric-actuated drum brakes (one to four axles) and some electric-over-hydraulic (EOH) brakes. It will not activate hydraulic surge-style trailer brakes.
Page 168 Towing The controller user interface consists of the following: A. + and - (Gain adjustment buttons): Pressing these buttons adjusts the controller’s power output to the trailer brakes in 0.5 increments. You can increase the gain setting to 10.0 (maximum trailer braking) or decrease it to 0 (no trailer braking).
Page 169 Explanation of Information Display Warning Messages Note: An authorized dealer can diagnose the trailer brake controller to determine exactly which trailer fault has occurred. However, your Ford warranty does not cover this diagnosis if the fault is with the trailer.
Page 170 Towing TRAILER BRAKE MODULE FAULT: Displays in response to faults sensed by the trailer brake controller, accompanied by a single chime. If this message appears, contact an authorized dealer as soon as possible for diagnosis and repair. The controller may still function, but performance may be degraded.
Page 171 The controller module and display turn on when you switch the ignition on. • The trailer brake controller is only a factory-installed or dealer-installed item. Ford is not responsible for warranty or performance of the controller due to misuse or customer installation. Trailer Lamps WARNING: Never connect any trailer lamp wiring to the vehicle’s tail lamp wiring;...
Page 172 Towing • When stopped in congested or heavy traffic during hot weather, place the gearshift in position P to aid engine and transmission cooling and to help A/C performance. • Turn off the speed control with heavy loads or in hilly terrain. The speed control may turn off automatically when you are towing on long, steep grades.
Page 173: Wrecker Towing
Towing When backing down a ramp during boat launching or retrieval: • Do not allow the static water level to rise above the bottom edge of the rear bumper. • Do not allow waves to break higher than 6 inches (15 centimeters) above the bottom edge of the rear bumper.
Page 174: Recreational Towing
Towing We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
Page 175: Driving Hints
Driving Hints PREPARING TO DRIVE WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. WARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. WARNING: Vehicles with a higher center of gravity such as utility vehicles and trucks handle differently than vehicles with a lower center of gravity.
Page 176 Driving Hints Vehicle stability and handling This van or wagon, like any vehicle designed to carry very heavy loads, must be driven differently from a passenger car. The extra weight can affect stopping distance and maneuverability. The higher center of gravity and other features may reduce the ability to make abrupt maneuvers and may increase the risk of rollover compared to a passenger car.
Page 177 Driving Hints • In an unavoidable emergency situation where a sudden sharp turn must be made, remember to avoid “over-driving” your vehicle, i.e., turn the steering wheel only as rapidly and as far as required to avoid the emergency. Excessive steering will result in less vehicle control, not more.
Page 178: Economical Driving
Driving Hints ECONOMICAL DRIVING Fuel economy is affected by several things, such as how you drive, the conditions you drive under and how you maintain your vehicle. There are some things to keep in mind that may improve your fuel economy: •...
Page 179: Floor Mats
Driving Hints DRIVING THROUGH WATER Note: Driving through deep water may allow water into the transmission and engine causing internal damage. Have the fluid checked and, if water is found, replace the fluid. Do not drive quickly through standing water, especially if the depth is unknown.
Page 180 Driving Hints WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
Page 181: Roadside Emergencies
ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: •...
Page 182: Hazard Flasher Control
U.S. Ford vehicle customers who require Roadside Assistance, call 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest dealership within 35 miles (56 kilometers). To obtain reimbursement information, U.S.
Page 183: Fuel Pump Shut-Off
WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision. JUMP-STARTING THE VEHICLE WARNING: The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes.
Page 184 Roadside Emergencies Preparing Your Vehicle Note: Use only a 12–volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle’s electrical system. 1. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch.
Page 185 Roadside Emergencies 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery.
Page 186 Roadside Emergencies Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface.
Page 187: Customer Assistance
A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford.
Page 188 • The name of the authorized dealer and city where located • The vehicle’s current odometer reading. In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states.
Page 189 In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126...
Page 190 BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
Page 191 ONLY) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation or arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
Page 192 Central America, the Caribbean, and Israel, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY FORD EXPORT OPERATIONS & GLOBAL INITIATIVES Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 U.S.A.
Page 193 If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.com. If you are in another foreign country, contact the nearest authorized dealer.
Page 194: Reporting Safety Defects (U.s. Only)
However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1–888–327–4236 (TTY: 1–800–424–9153);...
Page 195: Fuses
Fuses CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicle are not working, a fuse may have blown.
Page 196: Fuse Specification Chart
Fuses FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. Note: If your vehicle is equipped with a dual battery, disconnecting the primary under-hood battery does not remove power from all circuits.
Page 197 Fuses Fuse or relay Fuse amp Protected components location rating HC micro relay Wiper HC micro relay Trailer tow battery charge HC micro relay Fuel pump HC micro relay Trailer tow park lamp HC micro relay Upfitter #4 HC micro relay Upfitter #3 HC micro relay Modified vehicle and stripped...
Page 198 Fuses Fuse or relay Fuse amp Protected components location rating 10A* Brake on/off switch 10A* Cluster battery (stripped chassis) 50A** Blower motor 40A** Anti-lock brake system pump 20A** Stripped chassis horn 40A** Powertrain control module relay 20A** Ignition switch (stripped chassis) G8VA relay Trailer tow stop —...
Page 199 Fuses Fuse or relay Fuse amp Protected components location rating — Not used — Not used 20A* Trailer tow park lamp 15A* Trailer tow backup lamp — Not used — One touch integrated start (diode) — Not used HC micro relay Upfitter #2 30A** Trailer tow battery charge...
Page 200 Fuses Fuse or relay Fuse amp Protected components location rating 10A* Cluster run/start (stripped chassis) — Not used — Not used — Fuel pump (diode) — Not used HC micro relay Upfitter #1 * Mini fuses ** A1S fuses Passenger Compartment Fuse Panel WARNING: Always disconnect the battery before servicing high current fuses.
Page 201 Fuses The fuses are coded as follows: Fuse or relay Fuse amp Protected components location rating Inverter B+ Not used (spare) Not used (spare) Not used (spare) Passenger compartment fuse panel, Brake-shift interlock Turn signal, Hazard, Stop lamps Left low beam Right low beam Courtesy lamps Switch illumination...
Page 202 Fuses Fuse or relay Fuse amp Protected components location rating 7.5A Not used (spare) Mirrors SYNC®, Global positioning system module Not used (spare) Not used (spare) Door locks Not used (spare) Not used (spare) Diagnostic connector (except stripped chassis) Not used (spare) Park lamps, License plate lamps High beams Horn (except stripped chassis)
Page 203: Upfitter Controls
Fuses Fuse or relay Fuse amp Protected components location rating Radio, Navigation Amplifier Radio, Switch illumination, Reverse camera mirror, Automatic dimming rear view mirror, Inverter Upfitter switch Stripped chassis instrument panel connector #1 Trailer tow battery charge relay Wipers, Stripped chassis Engine connector 3 7.5A Passenger airbag deactivation...
Page 204 AUX 2 CAC06 Green with Brown Trace AUX 3 CAC07 Violet with Green Trace AUX 4 CAC08 Brown More detailed information about upfitter switches can be found at https://www.fleet.ford.com/truckbbas/. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 205: Maintenance
GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly.
Page 206: Opening And Closing The Hood
Maintenance OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom left corner of the instrument panel. 2. Go to the front of the vehicle and push the auxiliary latch, located in the center top of the grille, to the left in order to release the hood.
Page 207: Under Hood Overview
Maintenance UNDER HOOD OVERVIEW A. Battery B. Windshield washer fluid reservoir C. Engine oil filler cap D. Automatic transmission fluid dipstick E. Air filter assembly F. Engine oil dipstick G. Power steering fluid reservoir H. Brake fluid reservoir I. Engine coolant reservoir J.
Page 208: Engine Oil Dipstick
Maintenance ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Refer to the scheduled maintenance information for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait 15 minutes for the oil to drain into the oil pan.
Page 209: Engine Coolant Check
Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool 300ROB75240 available from your dealer. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. 2013 Econoline (eco)
Page 210 Maintenance Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location. Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly.
Page 211 Recycled Engine Coolant Ford Motor Company does not recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available. Always dispose of used automotive fluids in a responsible manner.
Page 212 Maintenance If you drive in extremely hot climates: • It is still necessary to maintain the coolant concentration above 40%. • NEVER decrease the coolant concentration below 40%. • A coolant concentration of 40% will provide improved overheat protection. Engine coolant concentrations below 40% will decrease the corrosion/freeze protection characteristics of the engine coolant and may cause engine damage.
Page 213 Maintenance Once the engine temperature cools, the engine can be restarted. Take your vehicle to an authorized dealer as soon as possible to minimize engine damage. When Fail-Safe Mode is Activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.
Page 214: Automatic Transmission Fluid Check
Maintenance TRANSMISSION FLUID CHECK Checking Automatic Transmission Fluid (If Equipped) Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes. Your transmission does not consume fluid. However, the fluid level should be checked if the transmission is not working properly, i.e., if the transmission slips or shifts slowly or if you notice some sign of fluid leakage.
Page 215 Maintenance Low Fluid Level Do not drive the vehicle if there is no indication of fluid on the dipstick and the ambient temperature is above 50°F (10°C). 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 216 Maintenance Correct Fluid Level The transmission fluid should be checked at normal operating temperature 150°F-170°F (66°C-77°C) on a level surface. The normal operating temperature can be reached after approximately 20 miles (30 km) of driving. You can check the fluid without driving if the ambient temperature is above 50°F (10°C).
Page 217 Maintenance The transmission fluid should be in this range if at ambient temperature (50°F-95°F [10°C-35°C]). 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 218 Maintenance High Fluid Level Fluid levels above the safe range may result in transmission failure. An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. High fluid levels can be caused by an overheating condition. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 219 Maintenance Adjusting Automatic Transmission Fluid Levels Note: Use of a non-approved automatic transmission fluid may cause internal transmission component damage. Note: An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. Note: Do not use supplemental transmission fluid additives, treatments or cleaning agents.
Page 220 Maintenance If an overfill occurs, excess fluid should be removed by an authorized dealer. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 221 Maintenance Automatic Transmission Fluid Filter The TorqShift® automatic transmission is equipped with a serviceable transmission fluid filter located inside the transmission bottom pan. Refer to your Scheduled Maintenance Information for service intervals for automatic transmission fluid and transmission filter. For transmission filter maintenance, see your authorized dealer.
Page 222: Brake Fluid Check
Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. 2013 Econoline (eco)
Page 223: Changing The Vehicle Battery
Maintenance State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. Washer fluids containing non-methanol antifreeze agents should be used only if they provide cold weather protection without damaging the vehicle’s paint finish, wiper blades or washer system.
Page 224 Maintenance Note: Electrical or electronic accessories or components added to the vehicle by the dealer or the owner may adversely affect battery performance and durability. Your vehicle is equipped with a Motorcraft® maintenance-free battery which normally does not require additional water during its life of service.
Page 225 Maintenance 3. Run the engine until it reaches normal operating temperature. 4. Allow the engine to idle for at least one minute. 5. Turn the A/C on and allow the engine to idle for at least one minute. 6. Release the parking brake. With your foot on the brake pedal and with the A/C on, put the vehicle in D (Drive) and allow the engine to idle for at least one minute.
Page 226: Checking The Wiper Blades
Maintenance CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES Replace wiper blades at least once per year for optimum performance.
Page 227 Maintenance When changing the air filter element, use only the air filter element listed. See Motorcraft® Part Numbers in the Capacities and Specifications chapter. See Scheduled Maintenance Information for the appropriate intervals for changing the air filter element. Note: Failure to use the correct air filter element may result in severe engine damage.
Page 228: Adjusting The Headlamps
Maintenance ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer. Vertical and Horizontal Aim Adjustment (Sealed Beam Headlamps) The headlamps on your vehicle are intended to be aimed using mechanical aimers.
Page 229 Maintenance 3. Turn on the low beam headlamps and open the hood. 4. Locate the high intensity area of the beam pattern and place the top edge of the intensity zone even with the horizontal reference line (D). If the top edge of the high intensity area is not even with the horizontal line, follow the next step to adjust 5.
Page 230 Maintenance • (A) 8 feet (2.4 meters) • (B) Center height of lamp to ground • (C) 25 feet (7.6 meters) • (D) Horizontal reference line 2. Measure the height from the center of your headlamp (indicated by a 3.0 millimeter circle on the lens) to the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height (a piece of...
Page 231: Changing A Bulb
Maintenance CHANGING A BULB Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold.
Page 232 Maintenance 2. Remove the three screws from the headlamp assembly and pull the assembly straight out. 3. Disconnect the electrical connector by squeezing the release tab and pushing the connector forward, then pulling it rearward. 4. Remove the bulb assembly by turning it counterclockwise and pulling it straight out.
Page 233 Maintenance Replacing Front Parking Lamp and Turn Signal Bulbs 1. Make sure the headlamp control is in the off position. 2. Remove the headlamp assembly. Refer to Replacing headlamp bulbs in this section. Aerodynamic Sealed Beam 3. Rotate the bulb socket counterclockwise and remove. 4.
Page 234 Maintenance Replacing Side Marker Bulbs 1. Make sure the headlamp control is in the off position. 2. Remove the headlamp assembly. Refer to Replacing headlamp bulbs in this section. Aerodynamic Sealed Beam 3. Rotate the bulb socket counterclockwise and remove. 4.
Page 235 Maintenance Replacing High-Mount Brake Lamp Bulbs On vehicles without a rear headliner, the interior cargo lamp (if equipped) must be removed from under the high-mount brake lamp assembly located inside the vehicle. Then, do the following: 1. Remove the two screws from the high-mount brake lamp assembly and lift the lamp from the vehicle.
Page 236 Maintenance Replacing Stop, Turn, Tail, Side Marker, and Backup Lamp Bulbs The stop, turn, tail, side marker, and backup lamp bulbs are located in the tail lamp assembly. Follow the same steps to replace any of the bulbs: 1. Turn the headlamp switch to the off position, then remove the four screws and the lamp assembly from the vehicle.
Page 237 Maintenance BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
Page 238: Vehicle Care
Vehicle Care GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft® Bug and Tar Remover (ZC-42) Motorcraft®...
Page 239 Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft® Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any painted surface;...
Page 240: Waxing
Vehicle Care WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area.
Page 241: Cleaning The Windows And Wiper Blades
Vehicle Care CLEANING THE WINDOWS AND WIPER BLADES The windows and wiper blades should be cleaned regularly. If the wipers do not wipe properly, substances on the vehicle’s glass or the wiper blades may cause squeaking or chatter noise from the blades, and streaking and smearing of the windshield.
Page 242: Cleaning The Instrument Panel And Instrument Cluster Lens
Vehicle Care For fabric, carpets, cloth seats, safety belts and seats equipped with side airbags: • Remove dust and loose dirt with a vacuum cleaner. • Remove light stains and soil with Motorcraft® Professional Strength Carpet & Upholstery Cleaner. • If grease or tar is present on the material, spot-clean the area first with Motorcraft®...
Page 243: Cleaning Leather Seats
Vehicle Care If a staining liquid like coffee or juice has been spilled on the instrument panel or on interior trim surfaces, clean as follows: 1. Wipe up spilled liquid using a clean, white, cotton cloth. 2. Wipe the surface with a damp, clean, white, cotton cloth. For more thorough cleaning, use a mild soap and water solution.
Page 244: Vehicle Storage
Vehicle Care • Never apply any cleaning chemical to hot or warm wheel rims or covers. • Some automatic car washes may cause damage to the finish on your wheel rims or covers. Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clearcoat finish over time.
Page 245 Vehicle Care Engine • The engine oil and filter should be changed prior to storage, as used engine oil contains contaminates that may cause engine damage. • Start the engine every 15 days. Run at fast idle until it reaches normal operating temperature.
Page 246 Vehicle Care Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle are covered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricate working parts and prevent corrosion. Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: •...
Page 247: Wheels And Tires
Wheels and Tires GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: •...
Page 248 Wheels and Tires How Your Vehicle Differs from Other Vehicles Sport-utility vehicles, vans and trucks can differ from some other vehicles in a few noticeable ways. Your vehicle may be: • Higher – to allow higher load carrying capacity and to allow it to travel over rough terrain without getting hung up or damaging underbody...
Page 249: Tire Care
10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
Page 250 Wheels and Tires Temperature A B C WARNING: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory...
Page 251 Wheels and Tires • Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position) or Tire Label located on the B-Pillar or the edge of the driver’s door.
Page 252 Wheels and Tires Note: If your tire size does not begin with a letter, this may mean it is designated by either the European Tire and Rim Technical Organization or the Japan Tire Manufacturing Association. B. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge.
Page 253 Wheels and Tires Letter rating Speed rating - mph (km/h) 168 (270) 186 (299 ) Note: For tires with a maximum speed capability over 149 mph (240 km/h), tire manufacturers sometimes use the letters ZR. For those with a maximum speed capability over 186 mph (299 km/h), tire manufacturers always use the letters ZR.
Page 254 Wheels and Tires • Temperature: The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. M.
Page 255 Wheels and Tires Information on T Type Tires T type tires have some additional information beyond those of P type tires. These differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
Page 256 You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial-type tire pressure gauge rather than a stick-type tire pressure gauge.
Page 257 Wheels and Tires Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the manufacturer’s recommended cold inflation pressure, which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located...
Page 258 Wheels and Tires Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type mini-spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size and dissimilar spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section.
Page 259 Wheels and Tires 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 260 Wheels and Tires WARNING: Stay out of the trajectory (1) as indicated in the illustration. Inspecting Your Tires and Wheel Valve Stems Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the tread grooves.
Page 261 Wheels and Tires WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (such as load, speed, inflation pressure) the tires experience throughout their lives. In general, tires should be replaced after six years regardless of tread wear.
Page 262 (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. The recommended tire and wheel size may be found on either the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or the Tire Label...
Page 263 The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
Page 264 Wheels and Tires Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds.
Page 265 Wheels and Tires The tires should also be balanced periodically. An unbalanced tire and wheel assembly may result in irregular tire wear. Tire Rotation WARNING: If the tire label shows different tire pressures for the front and rear tires and the vehicle is equipped with a tire pressure monitoring system, then the settings for the system sensors need to be updated.
Page 266: Using Snow Chains
USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
Page 267: Tire Pressure Monitoring System (Tpms)
Wheels and Tires Follow these guidelines when using snow tires and chains: • If possible, avoid fully loading your vehicle. • Use only SAE Class S chains. • Install chains securely, verifying that the chains do not touch any wiring, brake lines or fuel lines. •...
Page 268 Wheels and Tires Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated.
Page 269 Wheels and Tires Understanding your tire pressure monitoring system The tire pressure monitoring system measures pressure in your four road tires and sends the tire pressure readings to your vehicle. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure.
Page 270 Wheels and Tires Low tire pressure Possible cause Customer action required warning light Solid warning light Tire(s) 1. Make sure tires are at the under-inflated proper pressure. See Inflating your tires in this chapter. 2. After inflating your tires to the manufacturer’s recommended pressure as shown on the Tire Label...
Page 271 Wheels and Tires Low tire pressure Possible cause Customer action required warning light Flashing warning Spare tire in use Repair the damaged road light wheel/tire and reinstall it on the vehicle to restore system functionality. For a description on how the system functions, refer to When your temporary spare tire is installed in this section.
Page 272 • To reduce the chances of interference from another vehicle, the system reset procedure should be performed at least three feet (one meter) away from another Ford Motor Company vehicle undergoing the system reset procedure at the same time. • Do not wait more than two minutes between resetting each tire sensor or the system will time-out and the entire procedure will have to be repeated on all four wheels.
Page 273 Wheels and Tires 3. Cycle the ignition to the on position with the engine off. 4. Turn the hazard flashers on then off three times. This must be accomplished within 10 seconds. If the reset mode has been entered successfully, the horn will sound once, the system indicator will flash and the message center (if equipped) will display TRAIN LEFT FRONT TIRE.
Page 274: Changing A Road Wheel
However, if you must use a sealant, the tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized Ford dealer. WARNING: See Tire Pressure Monitoring System in this chapter for important information.
Page 275 Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
Page 276 Wheels and Tires 3. Full-size dissimilar spare without label on wheel When driving with the full-size dissimilar spare tire and wheel assembly, do not: • exceed 70 mph (113 km/h). • use more than one dissimilar spare tire and wheel at a time. •...
Page 277 Wheels and Tires WARNING: To help prevent the vehicle from moving when you change a tire, be sure to place the transmission selector lever in position P, set the parking brake and block (in both directions) the wheel that is diagonally opposite (other side and end of the vehicle) to the tire being changed.
Page 278 Wheels and Tires To remove the spare tire: 1. Open the rear doors and remove the thumb screw and anti-theft bracket. If finger pressure will not remove the thumb screw, use the lug wrench to loosen the screw. 2. Remove the access plug under the left door.
Page 279 Wheels and Tires • The jack is located in the rear right-hand side of the cargo area. 8. Remove any wheel trim. Insert the tapered end of the lug nut wrench behind wheel covers or hubcaps and twist off. 9. Loosen the wheel nut by pulling up on the handle of the lug nut wrench about one-half turn (counterclockwise).
Page 280 Wheels and Tires Rear axle jacking points - All models except E-350 dual rear wheel and E-450: Rear axle jacking points - E-350 dual rear wheel and E-450: Front axle jacking points: Note: Do not place the jack under or on the steering linkage. Place the jack under the pin on the front surface of the front axle.
Page 281 Wheels and Tires 8. Remove the jack and fully tighten the lug nuts in the following pattern. See Wheel Lug Nut Torque Specifications in this chapter for the proper lug nut torque specification. 9. Install any wheel covers, ornaments or hub caps. Make sure they are snapped in place.
Page 282: Technical Specifications
9/16 x 18 conical lug 9/16 x 18 two-piece lug nut * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 283 Wheels and Tires On all two-piece flat wheel nuts, apply one drop of motor oil between the flat washer and the nut. Do not apply motor oil to the wheel nut threads or the wheel stud threads. Note: Inspect the wheel pilot hole and mounting surface prior to installation.
Page 284: Capacities And Specifications
Capacities and Specifications ENGINE SPECIFICATIONS Engine 4.6L V8 engine 5.4L V8 engine 6.8L V10 engine Cubic inches Minimum Minimum Minimum Required fuel 87 octane or 87 octane or 87 octane Firing order 1-3-7-2-6-5-4-8 1-3-7-2-6-5-4-8 1-6-5-10-2-7-3-8-4-9 Ignition Coil on plug Coil on plug Coil on plug system Spark plug...
Page 285 Capacities and Specifications • 4.6L V8, 5.4L V8 and 6.8L V10 engines with A/C 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 286 Capacities and Specifications 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 287 Capacities and Specifications 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 288 Capacities and Specifications 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 289 Capacities and Specifications 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 290 Capacities and Specifications 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 291: Part Numbers
Note: Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft® or equivalent replacement parts. The customer warranty may be void for any damage to the engine if such spark plugs are not used.
Page 292: Vehicle Identification Number
Capacities and Specifications VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the driver’s side instrument panel. XXXXXXXXXXXXXXXXX Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehicle Identification Number (VIN) contains the following information: A.
Page 293: Vehicle Certification Label
Capacities and Specifications VEHICLE CERTIFICATION LABEL The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch, next to the...
Page 294 Capacities and Specifications Description Code Five-speed automatic (5R110W) Four-speed automatic (4R75E) 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 295: Accessories
Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through your local Ford or Ford of Canada dealer. Ford Motor Company will repair or replace any properly dealer-installed Ford Custom Accessories found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories.
Page 296 Ford Motor Company engineering requirements. Contact your Ford dealer for details regarding the manufacturer’s limited warranty and/or a copy of the FLA product limited warranty offered by the accessory manufacturer.
Page 297: Ford Extended Service Plan
BaseCare – Covers 84 components. PowertrainCare – Covers 29 critical components. Ford ESP is honored by all Ford and Lincoln Dealers in the U.S. and Canada. It is the only extended service plan authorized and backed by Ford Motor Company. That means you get: •...
Page 298 Protect Yourself from the Rising Cost of Vehicle Repairs with a Ford Extended Service Plan To learn more, call our Ford ESP specialists at 800–367–3377, and do not forget to ask about our interest free payment program, allowing you all the security and benefits Ford ESP has to offer while paying over time.
Page 299 This information is subject to change. For more information, visit your local Ford of Canada dealer or www.ford.ca to find the Ford Extended Service Plan that is right for you. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012...
Page 300: Scheduled Maintenance
Motor Company’s specifications. Parts installed at your dealership carry a nationwide, 12 month/12000 mile (20000 kilometer) parts and labor limited warranty. If you do not use Ford authorized parts, they may not meet Ford specifications and, depending on the part, it could affect emissions compliance.
Page 301 Ford Motor Company has recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends against maintenance schedules that deviate from the scheduled maintenance information.
Page 302 Scheduled Maintenance Owner Checks and Services Certain basic maintenance checks and inspections should be performed every month or at six month intervals. Check every month Engine oil level. Function of all interior and exterior lights. Tires (including spare) for wear and proper pressure. Windshield washer fluid level.
Page 303 In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
Page 304 Scheduled Maintenance 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012 USA (fus)
Page 305: Normal Scheduled Maintenance And Log
Scheduled Maintenance NORMAL SCHEDULED MAINTENANCE AND LOG Normal Scheduled Maintenance Every 7500 miles Change engine oil and filter. (12000 km) or six Rotate tires , inspect tire wear and measure months (whichever tread depth. comes first) Inspect wheels and related components for abnormal noise, wear, looseness or drag.
Page 306 Scheduled Maintenance Additional Maintenance Items Every 30000 miles Replace engine air filter. (48000 km) Every 60000 miles Change automatic transmission fluid and filter (96000 km) on 5–speed transmission. Consult dealer for requirements. Replace front wheel bearing grease and grease seal if non-sealed bearings are used. Every 97500 miles Replace spark plugs.
Page 307 Scheduled Maintenance Maintenance Schedule Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
Page 308 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 309 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 310 Scheduled Maintenance SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in one of the more demanding conditions listed below, you need to have some items maintained more frequently. If you only occasionally operate your vehicle under these conditions, it is not necessary to perform the additional maintenance. For specific recommendations, see your dealership service advisor or technician.
Page 311 Scheduled Maintenance Extensive Idling or Low-speed Driving for Long Distances as in Heavy Commercial Use (i.e., Delivery, Taxi, Patrol Car or Livery) Every 30000 miles Change automatic transmission fluid on 4–speed (48000 km) transmission. Replace front wheel bearing grease and grease seals if non-sealed bearings are used.
Page 312 Scheduled Maintenance Special Operating Condition Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
Page 313 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 314 Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water.
Page 315: Engine Coolant Change Log
Scheduled Maintenance ENGINE COOLANT CHANGE RECORD Initial change Six years or 105000 miles (168000 km) (whichever comes first) After initial change Every three years or 45000 miles (72000 km) Engine Coolant Change Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
Page 316: Sync
SYNC® SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist®, Vehicle Health Report and SYNC Services (Traffic, Directions &...
Page 317 Safety Information WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
Page 318 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
Page 319 SYNC® USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display.
Page 320 SYNC® Adjusting the Interaction Level Push the voice icon; when prompted, say “Voice settings”, then any of the following: When you say: The system: “Interaction mode standard” Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts.
Page 321 SYNC® • Speak naturally, without long pauses between words. • At any time you can interrupt the system while it is speaking by pressing the voice icon. USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’s functionality.
Page 322 SYNC® Depending on your phone’s capability and your market, the system may prompt you with questions such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up), downloading your phone book, etc. Pairing Subsequent Phones Note: To scroll through the menus, press the up and down arrows on your audio system.
Page 323 SYNC® “PHONE” “Call <name> at home” “Call <name> at work” OR “Call <name> in office” “Dial” “Phone book <name>” “Phone book <name> at work” OR “Phone book <name> at office” “Call history incoming” “Connections” “Go to privacy” “Hold” These commands do not require you to say “Phone” first. These commands are not available until phone information is completely downloaded using Bluetooth.
Page 324 SYNC® “DIAL” “411” (four-one-one), “911” (nine-one-one), etc. “700 (seven hundred)” (seven hundred) “800 (eight hundred)” (eight hundred) “900 (nine hundred)” (nine hundred) “#” (pound, slash) “<number> 0–9” “Asterisk” (*) “Clear” (deletes all entered digits) “Delete” (deletes one digit) “Plus” “Star” Note: To exit dial mode, press and hold the phone button or press MENU to go to the PHONE menu.
Page 325 SYNC® To access: 1. Press MENU during an active call. 2. When Active Call Menu is selected, press OK. 3. Scroll to cycle through the following options: When you select: You can: Mute the call. Mute Call? Switch a call from an active hands-free Privacy environment to your cellular phone for a more private conversation.
Page 326 SYNC® When you select: You can: Call History Access your call history log. 1. Press OK to select, then scroll through your call history options (incoming, outgoing or missed). 2. Press OK when the desired selection appears in the display. 3.
Page 327 SYNC® When you select: You can: Allows you to access your downloaded Phonebook phonebook. 1. Press OK to confirm and enter. If your phonebook has fewer than 255 listings, they appear alphabetically in flat file mode. If there are more, they are organized into alphabetical categories.
Page 328 SYNC® Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature.
Page 329 Each text message is sent with the following signature: “This message was sent from my <Ford or Lincoln>”. 2013 Econoline (eco) Owners Guide gf, 2nd Printing, November 2012...
Page 330 SYNC® Pre-defined text message options Can’t talk right now Call me Call you later Be there in 10 minutes Be there in 20 minutes Why? Thanks Where R you? I need more directions I love you Too funny Can’t wait to see you I’m stuck in traffic Accessing Your Phone Settings These are phone-dependent features.
Page 331 SYNC® When you select: You can: Select which ring tone sounds during an Set Ringer incoming call (one of the system’s or your phone’s). 1. Press OK to select and scroll to hear Ringer 1, Ringer 2, Ringer 3 and Phone Ringer.
Page 332 SYNC® When you select: You can: Auto Download Automatically download your phone book each time your phone connects to SYNC. Press OK to select. When Auto Download On? appears, press OK to have your phonebook automatically downloaded each time. Select Off to NOT download your phonebook every time your phone connects to SYNC.
Page 333 SYNC® Bluetooth Devices Menu Options This menu allows you to add, connect, delete, set a phone as primary, and turn Bluetooth on or off. 1. Press the phone button to enter the Phone Menu. 2. Scroll until System Settings appears and press OK. 3.
Page 334 SYNC® If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. When the desired selection is chosen, press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates all Bluetooth features.
Page 335 SYNC® Advanced Menu Options This menu allows you to access settings such as prompts, languages, defaults, perform a master reset, install an application and view system information. 1. Press the phone button to enter the Phone Menu. 2. Scroll until System Settings appears and press OK. 3.
Page 336 SYNC® If you select: You can: Master Reset Completely erase all information stored on SYNC (phonebook, call history, text messages and paired devices) and return to the factory default settings. Press OK to select. The display indicates when complete and SYNC takes you back to the Advanced menu.
Page 337: 911 Assist
SYNC® 911 Assist® WARNING: Unless the 911 Assist setting is set on prior to a crash, the system will not dial for help which could delay response time, potentially increasing the risk of serious injury or death after a crash. WARNING: Do not wait for 911 Assist to make an emergency call if you can do it yourself.
Page 338 SYNC® Setting 911 Assist On Perform the following: 1. Press the phone button to enter the Phone Menu. 2. Scroll until 911 Assist is selected. 3. Press OK to confirm and enter the 911 Assist menu. 4. Scroll to select between On and Off selections. 5.
Page 339: Vehicle Health Report
SYNC® If the call is not cancelled and a successful call is made, a pre-recorded message is played for the 911 operator, then the occupant(s) in the vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911 systems are capable of receiving this information electronically.
Page 340 SYNC® Note: In order to allow a break-in period for your vehicle, you may not be able to create a Vehicle Health Report until your vehicle odometer has reached 200 miles. Register for Vehicle Health Report and set your report preferences at www.SYNCMyRide.com.
Page 341 Certain versions or updates to Vehicle Health Report may also collect additional vehicle information. Ford may use the vehicle information it collects for any purpose. If you do not want to disclose your cellular phone number or vehicle information, do not run the feature or set up your Vehicle Health Report profile at www.SYNCMyRide.com.
Page 342 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect the vehicle travel information or other information identified in the Terms and Conditions, do not activate or use the service.
Page 343 SYNC® Receiving Turn-by-Turn Directions 1. When connected to SYNC Services, say “Directions” or “Business search”. To find the closest business or type of business to your current location, just say “Business search” and then “Search near me”. If you need further assistance in finding a location you can say “Operator”...
Page 344 SYNC® Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel. 2. Say “Good-bye” from the SYNC Services main menu. SYNC Services Quick Tips You can personalize your Services feature to Personalizing provide quicker access to your most used or favorite information.
Page 345 SYNC® Note: The AppLink feature is not available if your vehicle is equipped with the MyFord Touch® or MyLincoln Touch™ system. Depending on your display type, you can access AppLink from the media menu, the phone menu, or by using voice commands. Once an app is running through AppLink, you can control main features of the app through voice commands and steering wheel controls.
Page 346 SYNC® USING SYNC WITH YOUR MEDIA PLAYER You can access and play music from your digital music player over the vehicle’s speaker system using the system’s media menu or voice commands. You can also sort and play your music by specific categories, such as artists, albums, etc.
Page 347 SYNC® What’s Playing? At any time when a track is playing, you can press the voice icon and ask the system, “What’s playing?”. The system reads the metadata tags (if populated) of the playing track to you. Media Voice Commands Press the voice icon and, when prompted, say “USB”...
Page 348 SYNC® “USB” “Search song <name>” “Search track <name>” “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. Voice commands which are only available in folder mode. Voice commands which are not available until indexing is complete.
Page 349 SYNC® Voice Command Guide “Refine” This allows you to make your previous command more specific. For example, if you asked to search and play all music by a certain artist, you could then say “refine album” and choose a specific album from the list to view.
Page 350 SYNC® When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plug in devices to charge them (if supported by your device). Once connected, the system indexes any readable media files. (The time required to complete this depends on the size of the media content being indexed.) If Autoplay is on, you can access media files...
Page 351 SYNC® When you select: You can: Choose to shuffle or repeat your music and Media Settings select your Autoplay settings. Once these selections are turned on, they remain on until turned off. Press SEEK to play the previous or next track. Note: Some digital media players require both USB and line in ports to stream data and music separately.
Page 352 SYNC® Accessing Your Play Menu This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. 1. Make sure that your device is plugged into the USB port and is turned on.
Page 353 SYNC® When you select: You can: Sort all indexed media by albums. If there are Albums less than 255 indexed albums, they are listed alphabetically in flat file mode. If there are more, they are organized into alphabetical categories. 1. Press OK to enter the album menu and select from playing all albums or from any individual indexed album.
Page 354 SYNC® When you select: You can: Explore USB Explore all supported digital media on your media device connected to the USB port. You can only view media content which is compatible with SYNC; other files saved are not visible. Press OK to select. Then scroll to explore indexed media on your flash drive.
Page 355 SYNC® Bluetooth Devices Menu Options This menu allows you to add, connect and delete devices as well as turn Bluetooth on and off. 1. Press AUX and then MENU to enter the Media Menu. 2. Scroll until System Settings appears and select OK. 3.
Page 356 SYNC® Advanced Menu Options This menu allows you to access settings such as prompts, language, performing a master reset as well as returning to factory defaults. 1. Press AUX and then MENU to access the Media Menu. 2. Scroll until System Settings appears and select OK. 3.
Page 357 SYNC® When you select: You can: Completely erase all information stored on Master Reset SYNC (all phonebook, call history, text messages and all paired devices) and return to the factory default settings. Download new software applications (if Application available) and then load the desired applications through your USB port.
Page 358 SYNC® Phone Issues Issue Possible Possible Solution(s) Cause(s) Excessive The audio control Review your phone’s user guide background noise settings on your regarding audio adjustments. during a phone phone may be call. affecting SYNC performance. During a call, I Possible phone Try turning off the device, can hear the malfunction.
Page 359 SYNC® Phone Issues Issue Possible Possible Solution(s) Cause(s) • This is a • Go to the website to review I am having trouble phone-dependent your phone’s compatibility. • Try turning off the device, connecting my feature, OR • Possible phone phone to SYNC.
Page 360 SYNC® USB/Media Issues Issue Possible Possible Solution(s) Cause(s) • Try turning off the device, I am having Possible device trouble malfunction. resetting the device or removing connecting my the device’s battery, then trying device. again. • Make sure you are using the manufacturer’s cable.
Page 361 SYNC® Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Possible Solution(s) Cause(s) • Your account • This is a free feature, but you I received a text that the Vehicle may not be must first register online to use Health Report is activated on the •...
Page 362 SYNC® Voice Command Issues Issue Possible Possible Solution(s) Cause(s) • You may be • Review the Phone voice SYNC does not understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections.
Page 363 SYNC® Voice Command Issues Issue Possible Possible Solution(s) Cause(s) • You may be • Review the phone voice SYNC does not understand or is using the wrong commands at the beginning of calling the wrong voice commands, the phone section. •...
Page 364: Navigation System (If Equipped)
Navigation System (If Equipped) NAVIGATION CONTROLS WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 365 Navigation System (If Equipped) Note: Some features, such as SIRIUS satellite radio, may not be available in your location. Check with your authorized dealer. A. Memory presets: • Store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns.
Page 366 Navigation System (If Equipped) K. SEEK: • In radio and satellite radio mode, press the arrow buttons to find previous or next available stations or channels within the currently selected Category or Genre. • In CD and DVD modes, press the arrow buttons to select the previous or next track or chapter.
Page 367: Status Bars
Navigation System (If Equipped) DISPLAY MODE You can choose to turn your screen on or off and if you would like to view the status bars on the top and bottom of the screen. Press DISP to see the options. Display Mode Voice Commands The following voice commands are available in display mode.
Page 368: Loading Pictures
Navigation System (If Equipped) Customizing Your Home Screen Depending on your vehicle’s option package and software, your screens may vary in appearance from the screens shown in this section. Your features may also be limited depending on your market. Check with your authorized dealer for availability.
Page 369: Voice Recognition
Navigation System (If Equipped) Note: Press the Reset button to return to the original image. To delete a photo, select the Delete button. To delete all photos: 1. Press the Menu hard button. 2. Select the System Settings tab on the touchscreen. 3.
Page 370 Navigation System (If Equipped) How To Use Voice Commands with Your System Press the voice icon; after the tone, speak your command clearly. You can say these commands at any time. “Audio” “Navigation” “CD” “Radio” “Disc” “SYNC” “Display mode” “Tutorial” “DVD”...
Page 371 Navigation System (If Equipped) Confirmation Prompts: The system uses these short questions to confirm your voice request. If turned off, the system simply makes a best guess as to what you requested. The system may still occasionally ask you to confirm settings. SYSTEM MENU FEATURES Your system offers many menu features, such as allowing you to adjust the touchscreen brightness, time and language, feedback and system...
Page 372 Navigation System (If Equipped) If you select: You can: Feedback Touch Screen Button Beep allows you to select when the system sounds an audible tone: All Buttons (whenever any system button is touched), Touch Screen (only when touchscreen selections are made) or Off (no audible tones at all).
Page 373: Accessing Media Features
Navigation System (If Equipped) If you select: You can: System Settings Language allows you to choose between English, Spanish and French. Units allows you to choose between English and Metric measurements. Keyboard Layout allows you to choose between an ABC or QWERTY keyboard. Delete Stored Items allows you to choose to delete all of the entries from Address Book, Previous Destinations, Avoid Areas, Saved...
Page 374 Navigation System (If Equipped) When you select: You can: Show Options Scan allows you to hear a brief sampling of all radio stations. Scan Presets allows you to hear a brief sampling of all stations stored in the memory presets. Autoset Presets allows you to store the strongest local stations available in the AM and FM frequency bands.
Page 375 Navigation System (If Equipped) Audio and Radio Voice Commands If you are listening to the audio system, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the audio system, press the voice button and, after the tone, say “Audio”, then any of the commands in the following chart.
Page 376 Navigation System (If Equipped) “TUNE” “<530–1710>” “AM preset <1–6>” “FM2” “<87.7–107.9>” “FM <87.7–107.9>” “FM2 preset <1–6>” “AM” “FM1” “Preset <1–6>” “AM <530–1710>” “FM1 preset <1–6>” “Help” “STORE” “Preset <1–6>” “AM preset <1–6>” “FM 1 preset <#>” “FM 2 preset <#>” “Autoset presets”...
Page 377 Navigation System (If Equipped) When HD Radio broadcasts are active, you can access the following functions: When you select: You can: Hear a brief sampling of all available stations. Scan This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels.
Page 378 Navigation System (If Equipped) When you select: You can: Multicast Allows you to choose which HD radio broadcast you would like to receive. When HD Radio broadcasts are available, this button appears if the selected station has more than one digital broadcast. HD1 signifies the main programming status and is available in analog and digital broadcasts.
Page 379 Navigation System (If Equipped) HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Page 380 HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology.
Page 381 Navigation System (If Equipped) HD Radio Voice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
Page 382 Navigation System (If Equipped) SIRIUS® Satellite Radio (If Activated) Press the RADIO hard button, then select SAT on the touchscreen. When you select: You can: SAT123 Press this button to access three different satellite radio modes (SAT1, SAT2 or SAT3). Scan Press this button to hear a brief sampling of all satellite radio channels within the current...
Page 383 Titles that you would like the system to alert you to when they are playing on other channels. Note: SIRIUS® does not support the Alert feature on all channels. Ford Motor Company shall not be responsible for Alert feature variation. Show Presets Display presets at the bottom of the screen.
Page 384 Navigation System (If Equipped) SIRIUS® Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
Page 385 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 386 Navigation System (If Equipped) Troubleshooting tips Radio Display Condition Possible Action Acquiring... Radio requires more No action required. than two seconds to This message should produce audio for the disappear shortly. selected channel. Sat Fault/SIRIUS There is an internal If this message does System Failure module or system not clear shortly, or...
Page 387 Navigation System (If Equipped) Press the MEDIA hard button, and then select the CD tab on the touchscreen. If there is no disc in the system, NO DISC appears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat, Shuffle, Track List and Record.
Page 388 Navigation System (If Equipped) Press the MEDIA hard button, and then select the CD tab on the touchscreen. If there is no disc in the system, NO DISC appears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat, Shuffle, Folder Mode and Folder List.
Page 389 Navigation System (If Equipped) When you select: You can: Title Go to the disc’s main title screen. Menu Go to the disc’s main menu. Cursor Controls Navigate to the desired menu selections. Settings Video Display Settings allows you to adjust the brightness and contrast.
Page 390 Navigation System (If Equipped) Disc Voice Commands If you are listening to or watching a disc, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to or watching a disc, press the voice button and, after the tone, say “Disc”, then any of the commands in the following chart.
Page 391: Jukebox Features
Navigation System (If Equipped) Video CD Voice Commands If you are watching a video CD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not watching a video CD, press the voice button and, after the tone, say “Video CD”, then any of the commands in the following chart.
Page 392: Accessing The Music In Your Jukebox
Navigation System (If Equipped) Accessing the Music in Your Jukebox Once you have saved music to your jukebox, you can then choose different ways to play the music. 1. Press the MEDIA hard button on the navigation system. 2. Select the Jukebox tab on the touchscreen. You can then select from the following options: When you select: You can:...
Page 393: Creating A Playlist
Navigation System (If Equipped) Creating a Playlist Press the MEDIA hard button, and then select the Jukebox tab on the touchscreen. 1. Select Options. 2. Select Edit Playlists, then which playlist you would like to create. 3. Select which category you would like to access from your saved music.
Page 394: Where Am I
Navigation System (If Equipped) While listening to the jukebox, press the voice button on the steering wheel control. When prompted, you may say any of these commands. User Device If your vehicle is equipped with SYNC®, there is a User Device tab. For more information, see the SYNC®...
Page 395 Navigation System (If Equipped) SIRIUS Travel Link can help you locate the best gas prices, find movie listings, get current traffic alerts, access the current weather map, get accurate ski conditions and scores to current sports games. Press the I (information) button, then select Sirius Travel Link. Choose from any of the following services: When you select: You can:...
Page 396 Navigation System (If Equipped) SIRIUS Travel Link Voice Commands Press the voice button and, after the tone, say “Travel Link”, then any of the commands in the following chart: “TRAVEL LINK” “5–day weather forecast” “NBA schedule” “Baseball schedule” “NBA scores” “Baseball scores”...
Page 397: Accessing The Help Screen
Navigation System (If Equipped) “SPORTS SCORES” “Baseball scores” “NBA scores” “College basketball scores” “NFL scores” “College football scores” “NHL scores” “Golf leaderboard” “Travel link help” “Motor sports results” Calendar Press the I (information) button, then select Calendar. You can then select which month you would like to view by using the arrow buttons or selecting Go to Today.
Page 398 Navigation System (If Equipped) If you select: You can: Basic Operation View hard buttons on your navigation system. Press the desired icon to view the button description. Driving Restriction View the system’s driving restriction. Traffic Legend View the color code for the Speed and Flow of roads on the navigation system.
Page 399: Navigation Features
Navigation System (If Equipped) NAVIGATION SYSTEM Your navigation system allows you to set a destination by using your touchscreen or voice commands. The navigation system contains map coverage for the United States, Puerto Rico and U.S. Virgin Islands, Canada and Mexico. Disclaimer A disclaimer appears once per ignition cycle when the DEST button is pressed.
Page 400 Navigation System (If Equipped) Quick Note: Items on this screen are selectable at any speed. Find Nearest POI Select up to five different points of interest (POI) favorites that you can search for while your vehicle is moving. You can change these categories at any time but the default categories are: •...
Page 401 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). You can store up to 25 entries, which you can Address Book use as destinations, waypoints and areas to avoid.
Page 402 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Street Address Touch this button to program a street address as a destination or waypoint. •...
Page 403 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Touch this button to select a point of interest Point of Interest (POI) on the map as a destination or waypoint. There are three ways to search for a point of interest: 1.
Page 404 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Freeway Touch this button to select an entrance and Entrance/Exit exit point to a freeway you select. You can sort the entrance and exit point alphabetically or in order of distance from your vehicle’s position.
Page 405 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Touch this button to select an intersection Intersection point. Enter the name of the first street, then the first letter of the second street.
Page 406 Navigation System (If Equipped) To delete all stored Address Book and Previous Destination entries at once: 1. Press the MENU hard button. 2. Select the System Settings tab. 3. Press the View button for Delete Stored Items. 4. Select Address Book or Previous Destinations. Edit Route Cancel Route Touch this button to cancel the current route.
Page 407 Navigation System (If Equipped) Programming a Destination Using Voice Commands Press the voice button on the steering wheel. If you want to: Say: Enter an address. “Destination street address” Enter an intersection. “Destination intersection” Find a point of interest “Destination nearest <POI category>” or (POI) by its category.
Page 408 Navigation System (If Equipped) Within these main categories, there are subcategories, which contain more listings: Subcategories Restaurant Auto Dealership Parking Public Transit Home & Garden Education Personal Care Services Setting Your Navigation Preferences Select settings for the system to take into account when planning your route.
Page 409 Navigation System (If Equipped) Map Preferences Bird’s Eye View ON provides an elevated map perspective. OFF turns the feature off. Adjust Angle offers six different map angles. Turn List Format Top-to-Bottom starts the turn instructions from the top. Bottom-to-Top starts the turn instructions from the bottom.
Page 410 Navigation System (If Equipped) Traffic Preferences Traffic Icons to Touch this button to display a list of map overlay on Map icons that you can turn off and on. The list of icons includes: • Weather related incidents • Road work •...
Page 411 Navigation System (If Equipped) Navigation Preferences Avg. Speed: When this feature is on, the system displays Residential the average speed on a residential road, initially set to 25 mph (40 km/h). You can change the setting for your driving preferences. This setting helps estimate your arrival time at a destination based on your driving preferences.
Page 412 Navigation System (If Equipped) Navigation Preferences Calibrate Position allows you to adjust the direction of your vehicle by pressing the arrow buttons on the screen. Distance allows you to recalibrate the distance to the destination while your vehicle is moving. Restore Default Touch the Reset button to return the settings Settings...
Page 413 Navigation System (If Equipped) North Up always shows the northern direction to be upward on the screen. Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scroll mode.
Page 414 Navigation System (If Equipped) No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may display under normal operation in an area with poor GPS access. Map Scale The map display scale has 17 levels, ranging from 0.02 miles (.03 kilometers) to 1000 miles (1600 kilometers).
Page 415 Navigation System (If Equipped) Quick-touch Buttons When in map mode, touch anywhere on the map display to access the following options: When you select: You can: Set as Dest Select a scrolled location on the map as your destination. You may scroll the map by pressing your index finger on the map display.
Page 416 Annual navigation map updates are available for purchase through your dealership, by calling 1-800-NAVMAPS (in Mexico, call 01–800–557–5539) or going to www.navigation.com/ford. You need to specify the make and model of your vehicle to determine if there is an update available.
Page 417 Navigation System (If Equipped) “DESTINATION” “<nametag>” “<POI category>” “Home” “Intersection” “Nearest <POI category>” “Nearest POI” “POI” “POI category” “Previous destination” “Street address” “Help” Troubleshooting Symptoms Possible Cause Action Focus error. The system is not able Contact your to play a reproduced authorized dealer.
Page 418 Navigation System (If Equipped) Symptoms Possible Cause Action A pop-up window The house number Press NO and enter a displays “Address not entered does not exist valid number for the found” or “Address in the map database. specified street, or range does not exist.
Page 419: Appendices
SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”) from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online”...
Page 420 Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
Page 421 SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental Components”). If FORD MOTOR COMPANY or third party software and services suppliers provide or make available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.
Page 422 DEVICE. UPGRADES AND RECOVERY MEDIA: If the SOFTWARE is provided by FORD MOTOR COMPANY separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled “For Upgrade Purposes Only” or For Recovery Purposes...
Page 423 For additional information, see http://www.microsoft.com/exporting/. TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, MS, Microsoft Corporation, third party software or service providers, their affiliates or suppliers.
Page 424 End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action.
Page 425 Appendices Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.
Page 426: Navigation End User License Agreement
Appendices Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to route you to emergency services.
Page 427 Appendices guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. No warranty: This Data is provided to you “as is,”...
Page 428 Data provided to you hereunder. FCC Compliance Changes or modifications not approved by Ford could void user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits with the Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 429 Appendices Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the Powered by Gracenote™ logo are trademarks of Gracenote. Gracenote® End User License Agreement (EULA) This device contains software from Gracenote, Inc. of 2000 Powell Street Emeryville, California 94608 (“Gracenote”).
Page 430 Appendices Gracenote uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow Gracenote to count queries without knowing anything about who you are. For more information, see the web page at www.gracenote.com for the Gracenote Privacy Policy THE GRACENOTE SOFTWARE, EACH ITEM OF GRACENOTE DATA AND THE GRACENOTE CONTENT ARE LICENSED TO YOU “AS IS.”...
Page 431: Index
Index 911 Assist™ ......336 Antifreeze (see Engine coolant) ....208 Anti-lock brake system (see Brakes) ......139 ABS (see Brakes) .....139 Anti-theft system ......62 Accessing call history/phone arming the system ....62 book during active call .....323 AppLink™ .........343 Accessing the help screen ..396 Audio system Accessing the music in your Single CD ......92–93...
Page 432 Creating a playlist .....392 parking ........140 Cruise control ......151 shift interlock ......136 trailer ........166 Customer Assistance ....180 Ford Extended Service Plan ........296, 298 Getting roadside assistance ...180 Getting the service you Capacities for refilling fluids ..285 need .........186 CD ..........92–93 Ordering additional owner’s...
Page 433 Index Emergencies, roadside filter, specifications ....221 jump-starting ......182 fuel pump shut-off ....182 running out of fuel ....124 octane rating ....124, 283 Emergency Flashers ....181 quality ........123 running out of fuel ....124 Emission control system ..127 safety information relating to End user license agreement ..418 automotive fuels .....121 Engine ........283 Fuel - flex fuel vehicle...
Page 434 Index Inspection/maintenance (I/M) Locks autolock ........58 testing ........130 doors ..........57 Instrument panel Lubricant specifications ...285 cleaning ........241 cluster ........78 Lug nuts ........281 Jack ..........273 Map icons ........412 positioning .......273 Map mode ........411 storage ........273 Map updates ......415 Joining two calls Media Bluetooth menu options (multiparty/conference call) ..323 (adding, connecting, deleting,...
Page 435 Index Parts Rear window defroster ..101–102 (see Motorcraft® parts) ..290 Receiving a text message ..327 Phone Bluetooth menu options Recommendations for (adding, connecting, deleting, attaching safety restraints for turning on/off) ......332 children ........24 Phone redial ......325 Relays ........194–195 Playing music (by artist, album, genre, playlist, tracks, Remote entry system similar) ........351...
Page 436 Index Scheduled Maintenance Guide SYNC® customer support ..316 Normal Scheduled SYNC® Services ......340 Maintenance and Log .....304 System overview .......363 SD card ........398 Seats child safety seats ....19, 24 front seats .......106, 108 Temperature control SecuriLock passive anti-theft (see Climate control) ..101–102 system ..........62 Text messaging ......327 Selecting your media source...
Page 437 Index Trailer Brake Ventilating your vehicle ...119 Controller-Integrated ....166 Voice commands in media Transmission ......131 mode ..........346 brake-shift interlock (BSI) ..136 Voice commands in phone fluid, checking and adding (automatic) ......213 mode ..........321 fluid, refill capacities ....285 Voice recognition ......368 lubricant specifications ..285 Troubleshooting ......416 Turn signal ........70...

This manual is also suitable for:

Econoline e-350 Econoline e-450 Econoline e-250 Econoline e-150 2013 Econoline e-350 2013 Econoline e-450 2013 ... Show all

Ford Econoline E-150 Owner's Manual

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Introduction

Child Safety

Safety Belts

Supplementary Restraints System

Keys and Remote Control

Locks

Security

Steering Wheel

Wipers and Washers

Lighting

Windows and Mirrors

Instrument Cluster

Information Displays Controls

Audio System AM/FM Stereo

Climate Control

Seats

Auxiliary Power Points

Starting and Stopping the Engine

Fuel and Refueling

Transmission

Brakes

Traction Control

Stability Control Advancetrac

Parking Aids

Cruise Control

Driving Aids

Load Carrying

Towing

Driving Hints

Roadside Emergencies

Customer Assistance

Fuses

Maintenance

Vehicle Care

Wheels and Tires

Capacities and Specifications

Accessories

Ford Extended Service Plan

Scheduled Maintenance

Sync

Navigation System (if Equipped)

Appendices

Index

Quick Links

Related Manuals for Ford Econoline E-150

Summary of Contents for Ford Econoline E-150