Established
4.2.3.2. UDP mode
The UDP mode operation is similar to that of TCP mode except that it is based on UDP protocol and
only one pre-defined remote host is able to communicate with the Pro Series. Users do not have to
configure cyclic connection, since UDP is a connectionless protocol.
Sync-Sent
TCP connection request accepted
Incoming data via serial port
Incoming data
from remote host
Accept
Sync-Recvd
Incoming data via serial port
Figure 4-5 State Transition Diagram of TCP mode
TCP connection request rejected
Or internal TCP time-out
In-coming TCP Close request
Inactivity time-out
Data
Reject
Incoming TCP connection request
48
Closed
Listen