Sena HelloDevice Pro PS110 Series User Manual page 19

Figure 2-14 Connecting a system console cable to the PS410
Figure 2-15 Connecting a system console cable to the PS810
2) Connect the other end of the cable to the serial port of the user' s computer.
3) Run a terminal emulator program (i.e. HyperTerminal). Set the serial configuration
parameters of the terminal emulation program as follows:
  9600 Baud rate
  Data bits 8
  Parity None
  Stop bits 1
  No flow control
4) Press the [ENTER] key.
5) Enter your username and password to log into the Pro Series. The factory default user
settings are as follows.
19