Sena HelloDevice Pro PS110 Series User Manual page 41

Port event handling
Figure 4-1 shows the web-based serial port configuration screen. This serial port configuration main
screen summarizes port information. In this summary page, user can find which host mode, local port
number and serial port parameters are currently configured.
User can configure port parameters by clicking number or title of corresponding serial port.
1
TCP/UDP mode only.
2
A backup host and port are used when connection to main host is failed
3
TCP mode only
Modem emulation
Add or Edit a remote host
1
Remote host
Remove a remote host
3
Cryptography SSLv3
Baud rate
Data bits
Parity
Stop bits
Flow control
Inter-character timeout (ms)
DTR behavior
DSR behavior
Enable/Disable modem
Modem init -string
Modem
DCD behavior
Automatic release modem connection
Enable/Disable Port logging
Port log storage location
Port logging
Port log buffer size
Display port log
Enable/Disable port event handling
Notification interval
notification
notification
Add/Edit an event keyword
Remove a keyword
Inactivity timeout (0 for unlimited)
Socket ID (for outgoing connection)
Accept unlisted
Send unlisted
2
Host IP address
Host port
Backup host IP address
Backup host port
Enable/Disable Email notification
Email
Subject of Email
Recipient' s Email address
Enable/Disable SNMP notification
Subject of SNMP trap
SNMP
SNMP trap receiver' s IP address
SNMP trap community
SNMP trap version
Event keyword
Email notification
SNMP trap notification
Port command
41