Table of Contents
Advertisement
During charging the charging process can be interrupted at any time by releasing the
handbrake.
4.4. Charging procedure ends
Bus driver sees that the charge progress is complete or he/she has to interrupt the charging
process to continue the operation.
Bus driver indicates readiness by releasing the handbrake.
Pantograph goes up automatically. Time between bus indication a stop charge (release
handbrake) until clearance to drive away is 5 seconds.
4.5. Charging procedure complete
Sensors will check if the pantograph is up and send a confirmation to the bus.
Bus driver receives OK signal on the dashboard.
Bus driver drives away.
Document: v0.4 / Document No.: 6AGA000008-0607-EN | Date: 22-05-2019
Page 15 of 25
Advertisement
Table of Contents
