MSI MS-9221 User Manual page 29

MS-9221 1U Rackmount Server
5. Place the heat sink on top of CPU1 and secure the screws on both sides.
Note: The heat sink has to be installed to prevent the CPU from overheating.
6. Follow the same procedures to install the second CPU and heat sink.
Note: To install DUAL CPUs on the board, you must use the same types of
CPUs running at the same FSB frequency.
7. Replace the fan duct.
Note: To ensure proper cooling,
make sure the heat sinks & the fan
duct are properly installed.
2-6