Agp (Accelerated Graphics Port) Slot; Pci (Peripheral Component Interconnect) Slots; Pci Interrupt Request Routing - MSI MS-7067 User Manual

The motherboard provides one AGP slot and three 32-bit PCI bus slots.

AGP (Accelerated Graphics Port) Slot

The AGP slot allows you to insert the AGP graphics card. AGP is an interface
specification designed for the throughput demands of 3D graphics. It introduces a
66MHz, 32-bit channel for the graphics controller to directly access main memory.
The mainboard supports 4x/8x 1.5V AGP card.

PCI (Peripheral Component Interconnect) Slots

The PCI slots allow you to insert expansion cards to meet your needs. When
adding or removing expansion cards, make sure that you unplug the power supply
first. Meanwhile, read the documentation for the expansion card to make any neces-
sary hardware or software settings for the expansion card, such as jumpers,
switches or BIOS configuration.

PCI Interrupt Request Routing

The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hard-
ware lines over which devices can send interrupt signals to the microprocessor. The
PCI IRQ pins are typically connected to the PCI bus pins as follows:
PCI Slot 1
PCI Slot 2
PCI Slot 3
Slots
Order 1 Order 2
INT G# INT H#
INT F# INT G#
INT E# INT F#
Hardware Setup
AGP Slot
PCI Slot
Order 3 Order 4
INT E# INT F#
INT H# INT E#
INT G# INT H#
2-19