Slots; Agp (Accelerated Graphics Port) Slot; Pci (Peripheral Component Interconnect) Slots; Pci Interrupt Request Routing - MSI MS-7181 Manual

MS-7181 Micro-ATX Mainboard
The motherboard provides one AGP slot and three 32-bit PCI bus slots.

AGP (Accelerated Graphics Port) Slot

The AGP slot allows you to insert the AGP graphics card. AGP is an interface speci-
fication designed for the throughput demands of 3D graphics. It introduces a 66MHz,
32-bit channel for the graphics controller to directly access main memory. The slot
supports 8x/4x AGP card.

PCI (Peripheral Component Interconnect) Slots

The PCI slots allow you to insert the expansion cards to meet your needs. When
adding or removing expansion cards, make sure that you unplug the power supply
first. Meanwhile, read the documentation for the expansion card to make any neces-
sary hardware or software settings for the expansion card, such as jumpers,
switches or BIOS configuration.

PCI Interrupt Request Routing

The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines
over which devices can send interrupt signals to the microprocessor. The PCI IRQ
pins are typically connected to the PCI bus INT A# ~ INT D# pins as follows:
PCI Slot 1
PCI Slot 2
PCI Slot 3
2-20

Slots

Order 1 Order 2
INT A# INT B#
INT B# INT C#
INT C# INT D#
Order 3 Order 4
INT C# INT D#
INT D# INT A#
INT A# INT B#