Husqvarna 535iRX Operator's Manual page 46

4. Turn the trimmer head (H) counterclockwise to
attach.
H
B
C
To remove the trimmer head T35 (535iFR, 535iRX)
1. Put the locking pin (C) in the hole to lock the shaft.
2. Turn the trimmer head (H) clockwise to remove it.
3. Remove the drive disc (B) from the output shaft.
H
B
C
To attach the trimmer head E35B (535iRXT)
Note:
To increase the life of the cord it can be soaked
in water for a couple of days before it is assembled. This
will make the cord tougher.
1. Put the drive disc (B) on the output shaft.
2. Turn the output shaft to align one of the holes in the
drive disc with the related hole in the gear housing.
3. Put the locking pin (C) into the hole to lock the shaft.
4. Attach the trimmer head (H).
46
5. Install the nut (G).
G
H
B
C
6. Install the line chute and the trimmer head cover (F).
F
To remove the trimmer head E35B (535iRXT)
Note:
To increase the life of the cord it can be soaked
in water for a couple of days before it is assembled. This
will make the cord tougher.
1. Put the locking pin in the hole to lock the shaft.
2. Press the snap-in clips on the trimmer head and
remove the trimmer head and trimmer line chute.
"Click"
609 - 009 - 15.09.2022