WARNING:
cutting attachment can result in injury or
death.
Cutting equipment and guards
WARNING:
remove the battery. Use protective gloves.
The product have different cutting attachment guards
for the cutting equipment that can be used. Make sure
that you use the correct cutting attachment guard for the
cutting equipment. Refer to
•
Grass blade guard and grass blade.
•
Trimmer guard and trimmer head.
•
Saw blade guard and saw blade.
44
An incorrectly attached
Stop the product and
Accessories on page 60 .
Assembly of the grass blade guard and the
grass blade
To attach the grass blade guard
•
Put the grass blade guard (A) onto the shaft and
tighten the bolt.
To remove the grass blade guard
•
Remove the bolt and remove the grass blade guard
(A) from the shaft.
To attach the grass blade
1. Put the gear of the product on a flat surface to make
sure that the blade is assembled correctly.
2. Turn the output shaft to align one of the holes in
the drive disc (B) with the related hole in the gear
housing.
3. Put the locking pin (C) in the hole to lock the shaft.
4. Put the grass blade (D), the support cup (E) and the
support flange (F) on the output shaft.
D
C
A
A
A
G
F
E
B
609 - 009 - 15.09.2022