Husqvarna 535iRX Operator's Manual page 40

trigger lockout move back to their initial positions. This
movement is operated by independent springs.
C
1. Make sure that the power trigger is locked when the
lock is in its initial position.
2. Press the power trigger and make sure that it goes
back to its initial position when you release it.
3. Make sure that the power trigger and the lock moves
freely and that the return spring operates correctly.
C
4. Start the product, refer to
page 51 .
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops fully.
40
A
B
A
B
A
B
To start the product on
To do a check of the user interface
1. Push and hold the start/stop button (A).
A
a) The product is on when the LED (B) is on.
b) The product is off when the LED (B) is out.
2. If the warning indicator (C) comes on or flashes,
Troubleshooting on page 58 .
refer to
To do a check of the vibration damping system
(535iRXT, 535iRX)
The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier. The vibration damping system of the product
decreases the vibration from the cutting attachment to
the handlebar and handles.
1. Stop the product.
2. Do a visual check for deformation and damage, for
example, cracks.
3. Push the anti-vibration suspension lightly and make
sure that it can move slightly in all directions.
To do a check of the quick release function
WARNING:
a defective quick release function.
1. Stop the motor.
2. Do a visual check for damage for example, cracks.
C
B
Do not use a harness with
609 - 009 - 15.09.2022