Safety - Husqvarna 525HF3S Operator's Manual

Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation Protection of the Environment
Operations (Noise Control) Regulation
2017. The guaranteed sound power level
of the product is specified in
data on page 16 and on the label.
The product agrees with the applicable
EC directives.
This product conforms to the applicable
UK regulations.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
1118 - 004 - 10.11.2022
There is no electrical insulation in this product. If the product touches or comes
near high voltage power lines, it can cause serious injury or death to the opera-
tor. Electricity can move between different objects by a curve. The highter the
voltage, the longer the electricity can move. Electricity can also move through
branches and other objects, especially if the object is wet. Always keep a dis-
tance at a minimum of 10 m/33 ft between the product and high voltage power
lines and/or objects that touches the power lines. If it is necessary to do work
near the power lines, make sure that the power is off before you start the work.
Keep a distance at a minimum of 15 m/50 ft to other persons or animals during
the operation.
Technical
Used if there is a risk of
Use stable boots with non-slip soles.
Use approved protective gloves.
Stop the product fully before you touch the
cutting tool.
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Euro V Emissions
WARNING:
voids the EU type-approval of this product.

Safety

CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
The rating plate shows serial number.
yyyy is the production year and ww is
the production week.
Tampering with the engine
Used if there is a risk of
3