Safety And General Specifications - Fluke OptiView III Series Getting Started Manual

Safety and General Specifications

Weight
Dimensions
AC input
Network Analysis Interface
Network Analysis interface LEDs
Capture Memory
Serial Configuration Port
Management Port
Shock and vibration
Laser
Operating Temperature
Connection to public telephone network
Safety
EMC
Table 3. General Specifications
1.63 kilograms (3.6 lbs)
4.1 x 21.1 x 32.8 cm (1.6 x 8.3 x 12.9 in), one half of a standard 19 in
rack mount width
85 to 265 VAC; 47/63 Hz; 25 watts
10/100/100 BASE-T (RJ-45) + SFP (100/1000 fiber)
Link, Utilization, Transmit, Collision, Errors
480 Mbytes
Serial RS-232 (9-pin male)
10/100/1000BASE-T (RJ-45) Ethernet
Meets requirements of MIL-PRF-28800F for Class 3 equipment
*
Class 1 Laser Product, complies with 21 CFR 1040.10 & 1040.11,
CFR(J), and EN60825-1:1994/A1:1997/A2:2002
10°C to 30°C (50°F to 86°F) with up to 95% Relative Humidity
10°C to 40°C (50°F to 104°F) with up to 75% Relative Humidity
Non-Operating Temperature-20°C to +60°C (-4°F to +140°F)
The analyzer network interfaces are NOT FOR CONNECTION TO
PUBLIC TELEPHONE SYSTEMS. The analyzer should only be connected
to the public phone network through regulatory agency compliant
modem devices.
)
Complies with CSA C22.2 No. 950 Canadian standards, and UL
1950 (US standards)
P
Complies with European Union directive EN60950 2
P
Complies with EN61326 Class A.
Workgroup Analyzer
Safety and General Specifications
nd
edition.
21