Code 900FD Quick Start Manual page 2

Universal Stand Assembly
(included when ordered as a Kit/Package)
Cleaning a CR900FD
The following agents are approved to clean a Code bar code reader:
1) Alcohol Wipes
2) CaviWipes® Disinfecting Towelettes
3) Clorox® Disinfecting Wipes
4) Clorox® Bleach Solution (10% Clorox bleach, 90% tap water)
5) Medical DiAirKem
6) Sani-Cloth® HB, Super Sani-Cloth® Germicidal, Sani-Cloth® Plus Germicidal Disposable Wipes
7) Virex® II Disinfectant Cleaner
Warranty
Code's CR900FD carries a five year standard warranty. Universal Stands follow the warranty
of the reader, and cables have a 90 day warranty period. For more warranty information,
please refer to the www.codecorp.com.
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com
© 2012. Code Corporation. All Rights Reserved.
(801) 495-2200
4
Code Reader™ 900FD (CR900FD)
Included with your CR900FD
Depending on the kit ordered, the following may have been shipped with your reader:
USB Affinity® Cable RS232 Affinity® Cable
w/ Power Supply
Attaching/Detaching a Cable
To attach a cable, plug the RJ-50 end of the Affinity® cable into bottom of the reader (Figure
1). Firmly push the connector into the reader until a snap can be heard, to indicate the cable
is properly attached. To detach a cable, press a paper clip into the hole on the back of the
CR900FD (Figure 2), and gently pull the cable from the reader.
Figure 1
C007258_02_CR900FD_Quickstart_Guide
Quickstart Guide
Universal Stand
Figure 2