Tenda HG7c Quick Installation Manual page 6

Ac1200 dualband wi-fi xpon ont
Table of Contents

Advertisement

Done.
To access the internet:
• Connect your wired device, such as a computer, to a LAN port of the ONT.
• Connect your wireless device, such as a smartphone, to the Wi-Fi network of the ONT using the
SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.
Tips:
• If you cannot access the internet after the configuration, refer to Q2 in FAQ.
• If you want to change the Wi-Fi name and password, refer to Q6 in FAQ.
PON WAN
This page is used to configure the parameters for PONWAN
nas0_0
Enable VLAN:
VLAN ID:
802.1p_Mark
Channel Mode:
Admin Status:
Connection Type:
MTU:
Enable IGMP-Proxy:
Enable MLD-Proxy:
IP Protocol:
PPP Settings:
UserName:
Password:
Type:
Port Mapping:
LAN_1
WLAN0
WLAN0-AP1
WLAN0-AP3
WLAN1
WLAN1-AP1
WLAN1-AP3
Apply Changes
0
PPPoE
Enable
Disable
INTERNET
1492
IPv4
Continuous
LAN_2
WLAN0-AP2
WLAN0-AP4
WLAN1-AP2
WLAN1-AP4
Delete

Advertisement

Table of Contents
loading

Table of Contents