Tenda HG7c Quick Installation Manual page 7

Option 2 Access internet over DHCP
Step 1: Log in to the web UI
Refer to Step 1: Log in to the web UI in Option 1 Access internet over PPPoE under Router mode
to log in to the web UI of the ONT.
Step 2: Set up a WAN connection
Choose WAN > PON WAN.
Tick Enable VLAN.
Enter the VLAN ID provided by your ISP.
Set Channel Mode to IPoE.
Set Connection Type to INTERNET.
Click Apply Changes.
Click OK when Change setting successfully is shown on the page.
PON WAN
This page is used to configure the parameters for PONWAN
nas0_0
Enable VLAN:
VLAN ID:
802.1p_Mark
Channel Mode:
Admin Status:
Connection Type:
MTU:
Enable IGMP-Proxy:
Enable MLD-Proxy:
IP Protocol:
WAN IP Settings:
Type:
Local IP Address:
Remote IP Address:
Subnet Mask:
IP Unnumbered
Request DNS
Primary DNS Server
Secondary DNS Server
Done.
To access the internet:
• Connect your wired device, such as a computer, to a LAN port of the ONT.
• Connect your wireless device, such as a smartphone, to the Wi-Fi networks of the ONT, using
the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.
Tips:
• If you cannot access the internet after the con guration, refer to Q2 in FAQ.
• If you want to change the Wi-Fi name and Wi-Fi password, refer to Q6 in FAQ.
0
IPoE
Enable Disable
INTERNET
1500
IPv4
Fixed IP
Enable
DHCP
Disable