Tenda HG7c Quick Installation Manual page 4

1. Connect and register the ONT
Caution, laser
DO NOT look directly at the PON port when the device is powered on, as well as the terminal of
the indoor fiber cord, to prevent any harm to your eyes.
Connect the ONT as shown in the figure. The ONT automatically adapts to the fiber access type. Wait
until the PON LED indicator lights solid on, then the ONT is registered successfully.
Power adapter
Rear panel
Tips:
If your ISP provides any parameters for registration, you can use them to manually register the ONT.
Method:
Use an Ethernet cable to connect a LAN port of the ONT to a computer, or connect your
smartphone to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi
password) on the bottom label.
Enter 192.168.1.1 in a web browser and log in to the web UI of the ONT (default login user
name and password are both admin).
Navigate to Admin > GPON Settings (or EPON Settings) and enter the parameters provided
by ISP.
2. Configure the internet access
Tips:
Choose a desired mode to configure your internet access:
• Router mode: Choose this mode if your internet access type is PPPoE or DHCP.
• Bridge mode (default): Choose this mode if your internet access type is PPPoE.
Fiber cord
PON port
Bottom panel