Tenda HG7c Quick Installation Manual page 10

Q4: I cannot find the 5 GHz Wi-Fi signal of the ONT on my wireless device. What should I do?
A4: Try the following solutions:
• Check whether your wireless device supports 5 GHz Wi-Fi network. Only devices supporting 5 GHz
network can find and connect to the 5 GHz Wi-Fi network.
• If you can find other 5 GHz Wi-Fi networks, refer to Q3.
Q5: How to reset the ONT?
Method1: After the ONT completes startup, press the WPS/RST button for more than 10 seconds
A5:
and release it. All LED indicators will light off in a few seconds. When the PWR LED
indicator lights solid on again, the ONT is reset.
Method2: Log in to the web UI of the ONT, choose Admin > Backup/Restore and click Reset on
the page.
Q6: How to change the Wi-Fi name and password?
Log in to the web UI of the ONT, choose WLAN and repeat the following steps in wlan0 (5GHz)
A6:
and wlan1 (2.4GHz):
• Wi-Fi name: Choose Basic Settings and change the SSID (Wi-Fi name). Click Apply Changes,
and click OK when Change setting successfully is shown.
• Wi-Fi password: Choose Security, set Encryption to WPA/WPA2-PSK (recommended) and
change the Pre-Shared Key (Wi-Fi password). Click Apply Changes, and click OK when
Change setting successfully is shown.