Polaris PRO XD Owner's Manual page 113

DEMAND DRIVE OIL CHANGE
1. Support the vehicle securely with a jackstand.
2. Remove the front tire on the passenger's side for ease of access (optional).
3. Remove the fill plug.
4. Place a drain pan under the drain plug
5. Remove the drain plug. Drain the oil.
6. Clean and reinstall the drain plug. Torque to specification.
7. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.
10. Discard used oil properly.
GREASE LUBRICATION POINTS
There are grease fittings at the rear stabilizer bar bushings and on the front
propshaft yokes. Apply grease until all traces of water have been purged out at
each of these areas.
ITEM
Premium U-Joint
Propshaft
Yoke Lubricant
Rear
Stabilizer
Premium All Season
Bar
Grease
Bushings
LUBE REC
w
on the bottom right-hand side.
METHOD
q
Grease middle
fitting
w
Grease fittings
MAINTENANCE
FREQUENCY
Grease fittings
every 500 miles
(800 km);
Grease before
long periods of
storage, and
after thoroughly
washing or
submerging the
vehicle
Grease fittings
every 500 miles
(800 km);
Grease before
long periods of
storage, and
after thoroughly
washing or
submerging the
vehicle
111