Polaris PRO XD Owner's Manual page 105

EVERY 200 HOURS / 2000 MILES (3200 KM) SERVICE
CODE
D Ratcheting Cam Chain
Tensioner
XU Radiator
XU Cooling Hoses
XU / D Engine Mounts
XU Engine Oil Lines / Fasteners
D Engine Valve Clearance
Exhaust Silencer / Pipe / Spark
Arrester
XU Wiring
D Clutches (Drive and Driven)
D Wheel Bearings
XU Tires / Wheels
XU Shocks
D Brake Fluid
D Front Wheel Alignment
Suspension Bushings
XU Rear Stabilizer Bar
TABLE 3.
ITEM
MAINTENANCE
ACTION
Check; replace as needed
Inspect; clean external surfaces
Inspect for leaks; pressure test
system
Inspect, torque to specification
Inspect for leaks and loose fittings
Check clearance; adjust as
needed
Inspect, clean out, replace
components as needed; Clean out
after operating in mud
Inspect for wear, routing, security;
inspect connectors subjected to
water, mud, etc.
Inspect; clean; replace worn parts
Inspect; replace as needed
Inspect tire tread; rotate as
needed
Visually inspect shock seals,
replace as necessary
Inspect level and quality, Change
every 2 years (DOT 4)
Inspect toe alignment, and adjust
if necessary
Inspect front and rear suspension
bushings; replace if necessary
Lubricate grease zerks and
inspect bushings
103