Polaris PRO XD Owner's Manual page 77

DRIVING ON SLIPPERY SURFACES
Skidding or sliding can cause loss of control or rollover (if tires regain traction
unexpectedly). When operating on slippery surfaces such as ice or loose
gravel, reduce speed and use extra caution to reduce the chance of skidding or
sliding out of control. Do not operate on excessively slippery surfaces.
When driving on slippery surfaces such as wet trails, loose gravel, or ice, be
alert for the possibility of skidding and sliding. Follow these precautions when
encountering slippery conditions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down before entering slippery areas.
3. Maintain a high level of alertness, reading the trail and avoiding quick, sharp
turns, which can cause skids.
4. Correct a skid by turning the steering wheel in the direction of the skid. Never
apply the brakes during a skid.
DRIVING UPHILL
Whenever traveling uphill, follow these precautions:
1. Avoid excessively steep hills.
2. Always travel straight uphill.
3. Keep both feet on the floor.
4. Always check the terrain carefully before ascending any hill. Never climb hills
with excessively slippery or loose surfaces.
5. Proceed at a steady rate of speed and throttle opening. Never open the
throttle suddenly.
6. Never go over the crest of a hill at high speed. An obstacle, a sharp drop, or
another vehicle or person could be on the other side of the hill.
WARNING
OPERATION
75