Advertisement
13
Shipping
stabilizers
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
16
Connect light lead wires. White to white,
blue (or black) to black (or blue). Make
sure the quick connectors are clasped
firmly.
© 2022 Monte Carlo Fan Collections
14
Switch housing cap
Remove switch housing cap by removing
the set screws. Keep screws.
17
Rubber washer
Hex nut
Final cap
Finial
Install the switch housing cap with light
fixture uses the set screws removed in
installation step 14.
Remove finial, final cap, hex nut and
rubber washer from light fixture. Keep the
parts.
5
15
Tap
Remove the tap from bottom of the switch
housing cap.
Place switch housing cap over light lead
wires and Installation light fixture onto the
switch housing cap with lock washer and
hex nut provided.
18
Install 2 x 9W medium base dimmable
LED bulbs. California Title 24 compliant
bulbs included.
Caution: Approved for use with LED light
bulb only (Part No. 97512S). Do not use
incandescent light bulb.
Caution: Do not replace bulb until it
cools down.
Light fixture
Bulb
3/2022
Advertisement
