Table of Contents
Advertisement
2 Overview
The PAN1026A is based on Toshiba´s single-chip TC35661 Bluetooth semiconductor device
with an embedded Toshiba Bluetooth SIG certified stack. The PAN1026A is a highly integrated
Dual Mode Bluetooth controller that delivers high-speed operation at ultra-low power
consumption. An embedded SPP (Serial Port Profile of Bluetooth Classic) and a GATT (Generic
Attribute Profile of Bluetooth LE) stack are integrated. The module significantly reduces external
component count and power consumption in applications requiring support of Bluetooth 4.2
standards. EDR (Enhanced Data Rate) or Central Mode are not supported. Details about iAP
integration can be provided on request. The integrated EEPROM has a Panasonic
MAC address and it can be used to store link keys.
The module allows for serving both legacy Bluetooth Classic and Bluetooth Low Energy
connections with rapid connection and disconnection, needed by a wide range of applications,
all at a small form factor. Compared to the PAN1026, the PAN1026A has additional features for
secure connections via Bluetooth LE and it is fully backwards compatible. Next to increased low
energy transfer speed, transmission power can also be controlled.
The PAN1026A module is manufactured in a small 15.6 x 8.7 x 1.9 mm SMD package with a
shielded case and it is qualified according to the Bluetooth 2.1 and 4.2 standards.
Please refer to the Panasonic website for related documents
Further information on the variants and versions
Product Specification Rev. 1.1
PAN1026A Bluetooth Module
7.2.2 Product Information.
7.1 Ordering Information.
2 Overview
Page 6
Advertisement
Table of Contents
