Dacor Modernist DTG30M954F Series User Manual page 40

Care and maintenance
Round Burner head / caps
40 English
NA9300K_MOD_DTG30M954FS_DG68-00927A-02_EN+MES+CFR.indb 40
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
1. Put the burner heads on the burner
bases as shown at left. The bottom of
the burner head fits inside the top of
the burner base.
2. Turn the head until it drops into place.
Twist each head clockwise and counter-
clockwise slightly to make sure it is
properly seated.
3. Place the burner caps (brass or
porcelain) atop the burner rings. The
ridge around the bottom of each cap
fits around the top of the ring.
CAUTION
Verify that all burner components rest
stably in place. If any components are
askew, disassemble them, and redo the
installation for any improperly installed
components.
2019-04-23 3:00:04