Channels - ALGE-Timing TIMY Instructions Manual

10.2.5 LANGUAGE
You can adjust the following languages as defaults for the TIMY
•
<GERMAN>
•
<ENGLISH>
•
<FRENCH>
•
<ITALIAN>
•
<SPANISH>
•
<SCHWEDISH>
10.2.6 STANDARD
Reset the TIMY to the factory defaults.
•
<STANDARD-SETT>
10.2.7 HARDWARE
This menu is only available for our service technicians.
10.2.8 PROGS ON OFF
As standard all programs are activated. The programs that are not used can be hidden to
reduce the select list. Can be unhidden any time.
10.3

CHANNELS

Configures the timing channels.
10.3.1 INTERNAL
10.3.1.1 DELAY
The delay time of the internal timing channels c0, c1, c2, c3, c4, c5, c6, c7 and c8 can be set.
(see point 5.2).
•
<DELAY START C0>
•
<DELAY C1-C8>
•
<DELAY C1>
•
<DELAY C2>
•
<DELAY C3>
•
<DELAY C4>
•
<DELAY C5>
•
<DELAY C6>
•
<DELAY C7<
•
<DELAY C8>
10.3.1.2 TED-CORRECTION
For automatic correction of each channel when impulses are transmitted with 0.1 seconds
delay by the TED.
10.3.1.3 EDGE
Setting of triggering the impulses either on closing or opening. Standard for all channels is on
closing.
Page 18
TIMY General
standard is 1.00 second
standard is 0.30 second