Printer; Change Of Paper - ALGE-Timing TIMY Instructions Manual

Charging:
The rechargeable batteries can be charged inside the TIMY with charger PS12 or PS12A, no
matter if the TIMY is switched on or off.
Depending on the type of rechargeable battery, the charging period is different:
•
NiCd rechargeable battery with 1 Ah
•
NiMH rechargeable battery with 1,5 Ah
If you want to reduce the charging period, we recommend using the desk charger LG6AA. It
is available with your ALGE-representative. However, you have to remove the rechargeable
batterys from the TIMY.
Charging switch:
The TIMY has got a switch (hidden behind the
battery label) for switching on or off the re-
chargeable battery charging.
Using alkaline batteries, the charging must be
switched off -position ALKALI-, as otherwise
the TIMY can be destroyed by leakage of the
batteries.
During the operation
batteries, the switch should be on position
NiCd/NiMH so that the rechargeable batterys
are charged.
Attention: Never use alkaline batteries in a TIMY when the charging switch is set on
NiCd/NiMH and a charger is connected.
Operating period:
The operating period depends on the TIMY Model, the batteries utilized and the ambient
temperature.
3

Printer

TIMY P and PXE dispose of an integrated thermal printer. The best paper for the printer is
our ALGE paper. It is recognizable by the ALGE logo print on the reverse side, available with
your ALGE representative.
3.1

Change of Paper

•
open printer cap
•
take out the paper axis
•
place the axis inside the paper roll
•
insert paper roll with axis into TIMY
•
thread paper through tear-off edge
•
close printer cap
Page 10
TIMY General
with rechargeable
approx. 14 hours
approx. 18 hours