Siemens SENTRON PAC3200T Product Manual page 84

Technical data
8.1 Technical data
Degree of protection and protection class
Degree of protection and protection class
Protection class
Degree of protection according to IEC 60529
Environmental conditions
Operation is only permissible inside an enclosed dry room.
Environmental conditions
Temperature range
Relative humidity
Installation altitude above sea level
Device mounting position
Degree of pollution
Environmental tests
Electromagnetic environment
82
Front area
Termination area
If higher degree of protection requirements are placed on the application engineering, the
customer must take suitable measures. This includes installation in a protective enclosure
with degree of protection IP51 or higher.
Ambient temperature during operating
phase
Ambient temperature during transport
and storage
interference emission
Limit values complied with for emitted
interference
Interference immunity
Standards considered for immunity
Safety class II
IP40
IP20
-25 °C ... +55 °C /
-40 °C ... +70 °C
(depending on HW, see device)
-40 °C ... +70 °C
< 75 % RH
max. 2000 m
Any
2
EN 60068-2-6
EN 60068-2-27
EN 60068-3-3
EN 61326-1
EN 61000-3-2 (harmonic currents)
EN 61000-3-3 (voltage variations and flicker)
Class B, used in the household sector
EN 61326-1
(use in an industrial environment)
EN 61000-4-2 (electrostatic discharge)
EN 61000-4-3 (electromagnetic RF fields)
EN 61000-4-4 (rapid transients - burst)
EN 61000-4-5 (surge voltages - surge)
EN 61000-4-6 (conducted RF fields)
EN 61000-4-8 (magnetic fields)
EN 61000-4-11 (voltage dips)
Equipment Manual, 09/2022, L1V30415168B-03