Table of Contents
Advertisement
Rapid heating
This function is not available for
power level 9, the Booster and
Double Booster functions.
The rapid heating function heats one
cooking zone at maximum power for a
limited time, after which it continues cooking
at the set power level.
After selecting a cooking zone:
• Press and hold a power level (from 1 to
8) for at least 3 seconds.
• The
symbol will appear on the
cooking zone display.
• After the heating time has elapsed, the
cooking zone will revert to the previously
selected power level.
This function can be deactivated by
pressing and holding the set power level for
at least 3 seconds, or by selecting a lower
power level.
Timer
This function is used to set a minute
minder timer, which will emit an
acoustic signal when the pre-set
time has elapsed.
After switching on the cooktop, without
having selected a cooking zone:
1. Touch the area inside the timer display.
26
Use
2. Press the + and - buttons to select the
required time.
• The first digit on the left is used to select
the hours, the middle digit sets the tens of
minutes and the one on the right sets the
minutes.
After switching on the appliance,
touch the timer display within 3
seconds, otherwise it will
deactivate and the appliance will
have to be restarted.
3. After 10 seconds, the timer will start the
countdown.
4. When the time elapses, a series of beeps
will sound. Press any button to deactivate
them.
A maximum of 9 hours and 59
minutes can be set.
Using the minute minder does not
stop the operation of the cooking
zones but rather informs the user
when the set minutes have run out.
Modifying or deactivating the timer
To modify or deactivate the timer during the
countdown:
1. Press the On/Off button
the cooktop (if it is in standby).
• The timer display will indicate the minutes
that were set.
to activate
Advertisement
Table of Contents
