Table of Contents
Advertisement
Multizone Function
This function can be used to:
Operate two cooking zones
simultaneously (front and
rear) in order to use cookware
such as rectangular pans or fish
kettles.
After having switched on the cooktop:
1. Place a finger simultaneously on the
buttons of two cooking zones one above
the other.
After a short beep, the
appear next to the button of the rear zone.
The Multizone function is now active.
2. Set the required cooking power using the
left hand side slider bar.
Use
symbol will
The same parameters are set for both
cooking zones.
The Multizone function can only
be activated between cooking
zones that are vertically connected
(zones indicated by "SX", "CNT"
and "DX" - see "General
Description").
This function automatically
distributes power equally between
both of the hot plates involved.
When the Multizone function is
active, it is not possible to use the
Double Booster function for the
zones in question.
If you use a large, oval or oblong pan,
make sure that you place it at the centre of
the cooking zone.
Example of correct positioning of pans
21
Advertisement
Table of Contents
