Advertisement

INSTRUCTION OF USE
SA611XC-1

Advertisement

Table of Contents
loading

Summary of Contents for Smeg SA611XC-1

  • Page 1 INSTRUCTION OF USE SA611XC-1...
  • Page 2: Table Of Contents

    Dear customers, Thank you for having chosen our ceramic hob. In order to make the best use of your appliance, we would advise you to read carefully the following notes and to keep them for later consulting. SUMMARY SAFETY ............................3 ......................
  • Page 3: Safety

    Safety Precautions before using  Unpack all the materials.  The installation and connecting of the appliance have to be done by approved specialists. The manufacturer cannot be responsible for damage caused by installation or connecting errors.  To be used, the appliance must be well-equipped and installed in a kitchen unit and an adapted and approved work surface.
  • Page 4: Precautions Not To Damage The Appliance

    Precautions not to damage the appliance  Raw pan bottoms or damaged saucepans (not enamelled cast iron pots,) may damage the ceramic glass.  Sand or other abrasive materials may damage ceramic glass.  Avoid dropping objects, even little ones, on the vitroceramic. ...
  • Page 5: Description Of The Appliance

    Total power Heating zone location Power Diameter Front left 1800 W 190 mm Rear left 1200 W 155 mm SA611XC-1 6000 W Rear right 1800 W 190 mm Front right 1200 W 155 mm Control panel Power display [ + ] key...
  • Page 6: Starting Up The Appliance

    STARTING UP THE APPLIANCE Before using your new hob Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks causing blue-tinted colour on the glass surface. Starting-up  Start-up/ switch off the hob Action Control panel Display...
  • Page 7: Control Panel Locking

    Control panel locking To avoid modifying a setting of cooking zones, in particular with within the framework of cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).  Locking Action Control panel Display Start Press key [ 0/I ] [ 0 ] or [ H ] on 4 displays...
  • Page 8: What To Do In Case Of A Problem

    WHAT TO DO IN CASE OF A PROBLEM The hob or the cooking zone doesn’t start-up:  The hob is badly connected to the electrical system.  The protection fuse has blown.  The locking function is activated  The sensitive keys are covered by grease or water. ...
  • Page 9: Installation Instructions

    INSTALLATION INSTRUCTIONS The installation comes under the exclusive responsibility of specialists. The installer is held to respect the legislation and the standards enforce in his home country. How to stick the gasket: The gasket supplied with the hob avoids all infiltration of liquids in the cabinet. His installation has to be done carefully, in conformity of the following drawing.
  • Page 10  The cut out sizes are: Reference Cut-size SA611XC-1 560 x 490 mm  Ensure that there is a distance of 50 mm between the hob and the wall or sides.  The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed with plenty of space on either side.
  • Page 11: Electrical Connection

    ELECTRICAL CONNECTION  The installation of this appliance and the connection to the electrical system should be entrusted only to a qualified electrician.  Protection against the parts under tension must be ensured after instalation  The data of connection necessary are on the stickers place on the hob casing near the connection box.
  • Page 12 17344/0...

Table of Contents