Advertisement
Quick Links
Ultra Speed 20 Battery Burnishers How To
Unplug battery charger
1
Wrap cord accordingly.
4
Inspect pad for wear.
7
Tighten pad retainer in
clockwise direction.
Palm buttons power the
10
pad drive and causes
the pad to spin and
lower to the floor
(
models without traction
Prepare for use
.
2
Check/inspect bag.
Replace bag if needed.
5
Turn pad retainer
counter clockwise to
remove the pad.
8
Prep area to remove
debris.
Turn on pad power
11
switch. Press palm
buttons to drive
machine and lower pad
).
to the floor
3
6
9
12
(traverse models)
Remove the skirt.
Install new pad/center
on outside diameter of
the pad driver.
Turn the key switch to
turn the machine on.
Check battery power.
Press the speed control
button to adjust traverse
speed.
Press the reverse button
while pressing palm buttons
machine in
to move the
reverse
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-Advance Clarke Ultra Speed 20
Summary of Contents for Nilfisk-Advance Clarke Ultra Speed 20
- Page 1 Ultra Speed 20 Battery Burnishers How To Prepare for use Unplug battery charger Remove the skirt. Check/inspect bag. Replace bag if needed. Wrap cord accordingly. Turn pad retainer Inspect pad for wear. Install new pad/center counter clockwise to on outside diameter of remove the pad.
- Page 2 Ultra Speed 20 Battery Burnishers How To Store the Machine Plug machine in Remove the cover to appropriate outlet to expose batteries for Wipe machine exterior charge batteries. ventilation. after each use. Ultra Speed 20 Battery Burnishers How To Maintenance Charge batteries daily.
Need help?
Do you have a question about the Clarke Ultra Speed 20 and is the answer not in the manual?
Questions and answers