Installing Cooling Fan - Dell PER4402A Installation And Service Manual

Figure 25. Removing the cooling fan
2. Lift the fan out holding the blue touch point.
Next steps
1. Install the cooling fan.
2. Install the internal riser.
3. Connect the power cable to the system board.
4. Ensure the cables are routed correctly.
5. Install the air shroud.
6. Follow the procedure listed in

Installing cooling fan

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the air shroud.
4. Remove the internal riser.
5. Remove the power cable.
6. Move the cables out of the way to access the cooling fan cable connector on the system board.
Steps
1. Holding the blue touch point, place the cooling fan into the cooling fan cage.
2. Route the cooling fan cable and connect it to the connector on the system board.
36 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
system.
system.