2. CORD REEL UNIT
10
(How
remove)
1. Loosen 3 screws and remove those screws holdmg cord
reel base so that it does not turn. Turn cord reel base
counterclockwise about 4 - 5 times until it is free from the
tension of spiral spring.
Remove cord reel wheel from cord reel
2.
to
(How
fit)
Put cord reel washer on cord reel wheel.
3.
4 . Put cord reel wheel in cord reel case.
5. Make sure that cord goes as far as possible by moving the
notching lever toward outside using screw driver.
6. Turn cord reel base counterclockwise about 4
and hold it not to turn clockwise in the tension of spiral
spring.
7.
Fit cord reel base with
cover.
5 times
-
screws.
3
4
2
-
-