Panasonic FP7 Series User Manual page 64

5.3 Trace Monitor (Time Chart)
A-1
■
Names and functions of parts
Mark Name
Trace data display area
A-1
(All devices)
Trace data display area
A-2
(Contact devices)
Trace data display area
A-3
(Data devices)
B-1 Graph display area
B-2 Time display area
Trace information display
B-3
area
Graph Option button (O)
C-1
Magnify (M)
5-8
C-1
B-3
A-2
B-1
A-3
Function
Displays the devices registered in the target LOG for the time chart
display.
● Select the device to be displayed in graphs from this list.
● Corresponding data is displayed at the position of the cursor [C] or [R]
in the graph display area (B-1).
● Contact data selected in A-1 is displayed in this area.
● When a lot of devices are registered, a scroll bar is displayed.
● Data other than the contact data selected in A-1 is displayed in this
area.
● Up to six data can be displayed in this area.
● Pressing the button which displays a device name can change the
line color.
● Trace data is displayed as line graphs in chronological order. (The
on/off state of contacts is displayed with a rectangular waveform.)
● The vertical line with a [T] mark is displayed at the point where a
trigger occurs.
● Displays the time between arbitrary two points or the time between
the point where a trigger occurs and an arbitrary point using the two
cursors [C] and [R] in B-1.
However, time is not displayed when the selected trigger type is other
than "Constant period".
● Displays the number of samplings and sampling rate.
● The sampling rate is displayed by time unit when the logging trigger is
"Constant period".
● When the logging trigger is "Bit" or "Instruction", this area is not
available. (A hyphen is displayed.)
● Enlarges graphs by pressing the button. (The values of the time scale
become small.)
B-2
WUME-FP7CPULOG-04