Panasonic FP7 Series User Manual page 18

1.4 Data Format
Hexadecimal integer (unsigned)
Data type
Data size
Number of
characters saved
Data range
Remarks
Character string
Data type
Data size
(Character count)
Number of
characters saved
Output sample
(Note 1) Double quotation marks " " are added before and after the character string when outputting the file.
Character string (with header)
Available with CPS4R*/CPS3R* firmware Ver. 4.54 or later and CPS2R firmware Ver. 1.54 or
later.
Data type
Description
Data size
(Character count)
Number of
characters saved
Output example
1-10
HEX (1-word)
1 words
4
0 to FFFF
Output in zero suppression format.
Character string
Specified in a range of 1 to 20 bytes (1 to 20 characters)
Outputs the specified number of characters plus 2 characters
"ABCD"
Character string (with one-word header)
The character string stored in the SSET
command can be specified.
2 to 129 words (number of characters + 1
(Note 2)
word)
Outputs the number of characters stored by the SSET/ESSET command + 2
(Note 3)
characters , up to the specified number of characters (1 to 256).
When specifying a character string stored in the next ESSET command
● Device registration example
HEX (2-word)
2 words
8
0 to FFFF FFFF
Character string (with two-word header)
The character string stored in the ESSET
command can be specified.
3 to 130 words (number of characters + 2
(Note 2)
words)
HEX (4-word)
4 words
16
0 to FFFF FFFF FFFF FFFF
(Note 1)
WUME-FP7CPULOG-04