Axis Q6225-LE User Manual page 14

AXIS Q6225-LE PTZ Camera
Additional settings
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD).
4. Select Invert this condition.
5. In the list of actions, under Power saving mode, select Use power saving mode while the rule is active.
6. Click Save.
Record video when the camera detects motion
This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.
Make sure that AXIS Object Analytics is running:
1. Go to Settings > Apps > AXIS Object Analytics.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs. If you need help, see the
user manual for AXIS Object Analytics.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select Object Analytics.
4. In the list of actions, under Recordings, select Record video while the rule is active.
5. Select an existing stream profile or create a new one.
6. Set the prebuffer time to 5 seconds.
7. Set the postbuffer time to 60 seconds.
8. In the list of storage options, select SD card.
9. Click Save.
Show a text overlay in the video stream when the device detects motion
This example explains how to display the text "Motion detected" when the device detects motion.
14